User manual ZOOM H2N
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ZOOM H2N. We hope that this ZOOM H2N user guide will be useful to you.
You may also download the following manuals related to this product:
ZOOM H2N (24321 ko)
ZOOM H2N (23345 ko)
ZOOM H2N (24357 ko)
ZOOM H2N (6068 ko)
ZOOM H2N (25510 ko)
Manual abstract: user guide ZOOM H2N
Detailed instructions for use are in the User's Guide.
[. . . ] Operation manual
©ZOOM Corporation
Reproduction or duplication of this manual without permission, in whole or in part, is prohibited.
H2n Handy Recorder
Usage and safety precautions
SAFETY PRECAUTIONS
In this manual, symbols are used to highlight warnings and cautions that you must read to prevent accidents. The meanings of these symbols are as follows: Something that could cause serious Warning injury or death. Other symbols Required (mandatory) actions Prohibited actions Read battery warning labels carefully. Battery handling Install the batteries with the correct +/orientation. [. . . ] Recording will stop automatically when the input signal becomes less than the REC STOP LEVEL.
3.
Use press
to select AUTO REC, and then .
7. 4.
26
Use press to select ON/OFF and then , .
Press
to end recording standby and
stop recording.
NOTE Automatic recording can only be used with an SD card.
27
H2n Handy Recorder
Pre-recording
Recording
Pre-recording
Counting in before recording
Recording
1. 5.
28
When pre-recording is on, this recorder can continuously capture two seconds of sound before recording is started manually. When is pressed, these two seconds are included at the beginning of the recording. to select REC, and then .
1.
The built-in metronome can play a count-in sound before recording starts. to select the pre-count number, .
NOTE PRE COUNT cannot be used at the same time as PRE REC.
Counting in before recording
Use press
to select PRE REC, and then .
Use
to select ON, and then press
5.
Press
NOTE ∙ PRE REC cannot be used at the same time as the metronome PRE COUNT function. ∙ Pre-recording can only be used with an SD card.
Use
after returning to the home screen to start recording.
and then press
6.
Press
after returning to the home
screen to start pre-count and recording.
29
H2n Handy Recorder
Playing back recordings
Playback Playback You can play files in the current folder. 2
Playing back recordings
Press
.
Use Hold Press
to jump between marks and files
Playing back recordings
to search forward or backward to pause and restart playback to adjust the volume
1
Use
HINT
The longer you hold the PLAY control the faster it will search in that direction.
2.
30
Press and hold screen.
to return to the home
31
Selecting the file to playback from a list
Playback
Selecting the file to playback from a list
H2n Handy Recorder Changing the playback speed
Playback You can change the playback speed to between 50% and 150% of normal speed.
You can select a file in the current folder for playback. 2.
When the playback screen is open, press
.
Use press
to select FILE LIST, and then
Changing the playback speed
.
Use press
to select SPEED, and then .
3.
Use
to select a file, and then press to start playback of that file.
3.
Use press
to set the playback speed, and then .
NOTE After a file plays once, playback will stop or continue according to the PLAY MODE setting.
Files will be played at the set speed.
NOTE
32
4.
Press and hold
to return to the home screen.
The set value will be saved even when the power is turned OFF .
33
H2n Handy Recorder
Loop playback of a set interval (AB REPEAT)
Playback
Loop playback of a set interval (AB REPEAT)
Playback
You can loop playback between two set points. Select the file that you want to play back first.
NOTE ∙ Use to search for the stopping point quickly.
1. 3.
When the playback screen is open, press
.
∙ If you set the stopping point before the starting point, they will be automatically swapped.
Use press
to select AB REPEAT, and then .
5. 6.
Press
to stop loop playback.
Loop playback of a set interval (AB REPEAT)
Use press
to select STOP REPEAT, and then .
Press playback.
NOTE Use
at the point you want to start
to search for the starting point quickly.
7.
Press
.
4.
Press playback.
at the point you want to stop
Loop playback between the points will start.
34
35
H2n Handy Recorder
Changing the play mode
Playback
Changing the play mode
Playback
1. 2.
When the playback screen is open, press
.
4.
Press mode.
to start playback in the selected
Use press
to select PLAY MODE, and then .
Changing the play mode
3.
Use press
NOTE PLAY ALL:
to set the mode, and then .
PLAY ONE: REPEAT ONE: REPEAT ALL:
Play all the files in the current folder once. Play all the files in the current folder repeatedly.
36
37
H2n Handy Recorder
Adjusting the playback pitch (KEY CONTROL)
Playback
Adjusting the playback pitch (KEY CONTROL)
Changing the S level
MS-RAW only
Playback
You can change the pitch without changing the playback speed.
1. 2.
The S level (stereo width) of files recorded using MS-RAW mode can be changed. Select a file that has been recorded in MS-RAW mode first.
When the playback screen is open, press
.
1. 3.
When the playback screen is open, press .
HINT If you select a file recorded using MS-RAW mode the icon will appear.
Use press
to select KEY CONTROL, and then .
Use
to select MS SIDE MIC LEVEL, and .
Changing the S level
then press
3.
Use
to adjust the playback pitch, and to start playback at the
Use press
NOTE
to adjust the S level, and then .
then press adjusted pitch.
NOTE
Set to OFF or between –24 and +6 dB.
38
∙ The pitch can be adjusted by ±6 semitones. ∙ KEY CONTROL cannot be used with 96kHz WAV files.
4.
Press level.
to start playback with the adjusted S
39
H2n Handy Recorder
Mixing a 4ch surround file
Playback
Mixing a 4ch surround file
Playback
You can adjust the levels and panning of the MS and XY recordings made for 4ch surround files.
1. 4.
Set the recorder to 4ch surround mode, select the file you want to mix, and then press .
MS LEVEL XY LEVEL MS PAN XY PAN
Parameter setting ranges MUTE, –48 ~ +12 dB (0. 5 dB increments) L100 ~ CENTER ~ R100 (even values only)
Explanation Adjusts volume Adjusts left-right balance
5.
Press
NOTE
to turn the mixer ON or OFF .
Mixing a 4ch surround file
Press
.
The mixer setting is only applied to playback. It does not change the recordings.
Use
to select SURROUND MIXER, and .
then press
6.
Press screen.
twice to return to the playback
Change the values of the parameters. Use values Push to select a parameter to change to move the cursor and change
40
41
H2n Handy Recorder
Checking & Editing Files
Checking file information
Checking & Editing Files
Checking file information
You can check various types of information about the current file.
Checking track marks
WAV files only
You can view a list of the marks in a WAV file.
1. 4.
Press
.
1.
to select FILE, and then press .
Press
.
Use
2. [. . . ] In such a case, install new batteries or use an AC adapter (sold separately).
84
85
H2n Handy Recorder
Using a remote control
Troubleshooting
from a . is not operating properly, please check the following ◆ Recording is not possible · Confirm that the SD card has open space. (➝ P . 82) · If “Hold” appears on the display, the hold function is enabled. (➝ P . 15)
Other functions
Using a remote control
•
By using a remote control (sold separately) you can operate the distance. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ZOOM H2N
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ZOOM H2N will begin.