Detailed instructions for use are in the User's Guide.
[. . . ] Installation, Setup & Operating Guide I Warranty Model Number | L15V26C | LCD-TV / Monitor
© Copyright 2002, Zenith Electronics Corporation.
RECORD YOUR MODEL NUMBER (For future reference) The model and serial number of your TV are located on the back of the TV cabinet. For convenience, we suggest that you record those numbers here: MODEL NO. _______________________________ SERIAL NO. _______________________________
WARNING
RISK OF ELECTRIC SHOCK DO NOT OPEN
WARNING :
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING :
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. [. . . ] Turn the TV on and use the tv/video button to select Video source.
Video
tv/video
On Remote Control
206-3839-01
16
DVD Player Connections
q
Connect DVD/DTV output jacks to TV's COMPONENT (480i/480p/720p/1080i), Y, PB, PR jacks and S-video jack. Connect DVD/DTV audio output jacks to right and left input jacks on TV.
1
Connections
INSTALLATION 17
AC INPUT (120V)
Y
PB
PR
H/P
S-VIDEO
VIDEO(MONO) L AUDIO R VIDEO IN
PC INPUT L
ANT IN +75
COMPONENT(480i/480p/720p/1080i)
PC SOUND
DVD/DTV IN
TV Connection Panel
Y
PB
PR
(R) AUDIO (L)
or
S-VIDEO
(R) AUDIO (L)
DVD Connection Panel
Note:
TV INPUT
Y
PB
PR
DVD OUTPUT
Y Y Y Y
Cb B-Y Pb PB
Cr R-Y Pr PR
2
Viewing Setup
Turn on the DVD player. q See DVD/DTV user's manual for operating instructions.
q q
Component
tv/video
206-3839-01
DTV (Set-top Box) Connections
q
Connect DVD/DTV output to COMPONENT(480i/480p/720p/1080i), Y, PB, PR jack inputs on the TV. Note: A DTV set-top box is required to receive DTV programming.
1
Connections
AC INPUT (120V)
Y
PB
PR
H/P
S-VIDEO
VIDEO(MONO) L AUDIO R VIDEO IN
PC INPUT L
ANT IN +75
COMPONENT(480i/480p/720p/1080i)
PC SOUND
DVD/DTV IN
TV Connections Panel
Y
PB
PR
(R) AUDIO (L)
DTV Receiver (Set-top Box) Connections Panel
2
Viewing Setup
q q
Turn on the DTV receiver (Set-top Box). Turn the TV on and use tv/video button to select Component source.
Component
tv/video
On Remote Control
206-3839-01
18
PC/Computer Connections (using TV as a Monitor)
- After setup, be sure to select RGB-PC to see the PC image on TV screen.
q
q
Connect the TV to the PC with the PC cable. Connect the PC audio output to the TV's PC SOUND input.
q
VIDEO (MONO) L VIDEO IN
AUDIO
R
PC INPUT
ANT IN +75
PC SOUND
TV Connections Panel
PC Connections Panel
2
Viewing Setup
q q
Turn on the PC/Computer. Turn the TV on and use tv/video button to select PC source.
PC
tv/video
On Remote Control
206-3839-01
19
INSTALLATION
1
Connections
Set the monitor output resolution on the PC before connecting to the TV. See the next page.
PC/Computer Connections (using TV as a Monitor)
Displayable Monitor Output Format Specifications
MODE Resolution
640x400 640x480 640x480 VGA 640x480 640x480 640x480 800x600 800x600 SVGA 800x600 800x600 800x600 (MAC) XGA 832x624 1024x768 1024x768 1024x768
Horizontal Frequency (KHz)
37. 9KHz 31. 5KHz 35. 0KHz 37. 9KHz 37. 5KHz 43. 3KHz 35. 2KHz 37. 9KHz 48. 1KHz 46. 9KHz 53. 7KHz 49. 7KHz 48. 4KHz 56. 5KHz 60. 2KHz
Vertical Frequency (Hz)
85Hz 60Hz 67Hz 72Hz 75Hz 85Hz 56Hz 60Hz 72Hz 75Hz 85Hz 75Hz 60Hz 70Hz 75Hz
Notes: a. For optimum picture quality, use standard XGA (1024x768) computer output at a 60Hz refresh rate. Using other formats (i. e. : VGA, SVGA, etc) or refresh rates may result in reduced picture quality. (To change the computer video output format, please refer to the operating manual for the computer you are using). If the message "OUT OF RANGE" appears on the screen, adjust the PC output to a format listed in the `Displayable Monitor Output Format Specifications' chart above. The synchronization input form for Horizontal and Vertical frequencies is separate. DPM (Display Power Management) mode When the PC is in the power saving mode, the monitor automatically switches to DPM mode.
206-3839-01
20
PC Mode Functions Check
- After setup, be sure to select PC source to see the PC image on TV screen.
1
Use the menu button to display the available menu shown below.
Contrast Brightness H-Position V-Position Clock Phase Auto configure Reset
DE
80 60 0 0 40 16
Move
FG
Adjust Menu
H-Position/V-Position Adjusts picture left/right and up/down. Based on the input mode, the adjustment range of V-Position may change. q Clock Minimizes any vertical bars or stripes appearing on the screen background. q Phase Remove any horizontal noise and clear up or sharpen the character images. q Auto-configure Automatically adjusts the screen position, clock and clock phase. (The displayed image will disappear for a few seconds while Auto-configuration is in progress. ) q Reset Returns to the default settings programmed at the factory; default settings cannot be changed.
q
206-3839-01
21
INSTALLATION
Turning the TV On
TV Operation Overview
1 2 3 1 2 3
First, connect antenna cable and power cord correctly. At this moment, the TV is switched to standby mode.
q
In standby mode, press the power, ch (D, E), tv/video or number buttons on the remote control or ch (D, E), tv/video or on/off on the TV side panel to turn it on fully.
Select the viewing source by pressing tv/video repeatedly.
q
Note: See page 25 if you have not auto programmed the TV to receive channels in your local broadcast area.
After viewing, press the power button on the remote control. The TV screen goes dark and it reverts to standby mode.
Watching TV Programs
Press power on the remote control to turn the TV on.
Use the channel (D, E) or number buttons to select a channel to view.
Adjust Volume level.
q
Volume (G) button increases the sound level. Volume (F) button decreases the sound level.
Volume 45
q
- If you will be away on vacation, disconnect the power plug from the wall power outlet.
206-3839-01
22
TV Mode Menus
1
Press the menu button repeatedly to display the available menus shown below.
Auto program Manual program Favorite channel
APC Contrast Brightness Color Sharpness Tint
DE
Clear 85 50 70 50 0
FG
DE
Move
G
Next Menu
Move
Adjust Menu
Language Captions Caption/Text Key lock Parental Ctl
English Off CC 1 Off
DASP Balance AVL
0 Off
DE
Move
FG
Adjust Menu
DE
Move
G
Next Menu
Clock Off timer On timer Auto off
-- : -- AM
Off
DE
Move
G
Next Menu
2
Use the channel (D, E) buttons to select a menu option.
206-3839-01
23
BASIC FEATURES
Menu Language Selection
Language
1
Use the menu button to select the menu shown.
2
Use the volume (F, G) buttons to select the language for the menus to appear in.
Language Captions Caption/Text Key lock Parental Ctl
English Off CC 1 Off
Language Captions Caption/Text Key lock Parental Ctl
English Off CC 1 Off
DE
Move
FG
Adjust Menu
DE
Move
FG
Adjust Menu
q
Each press of volume (F, G) buttons selects languages in the order shown below.
English
Español
Français
3
Press the menu button to save.
206-3839-01
24
Auto Programming: Finding/Erasing Channels
- For Auto program to work, the programming source must be connected to the TV and the TV must be receiving programming signals either over-the-air or from a cable-type service provider.
Channel Search (Auto Programming)
1
Press the a. prog button on the remote control.
2
Press the a. prog or volume (F, G) buttons to begin the channel search.
q
Auto program
FG
Channel number being memorized is displayed.
Auto program Stop : A
TV 63 34%
- When the channel search is complete, use the channel (D, E) buttons to review the memorized channels. [. . . ] block MPAA Age block Content block Set hours Set password Lock on/off
DE
Unblocked Unblocked
6
Press the channel (D, E) buttons to select the Lock on/off option. SPECIAL FEATURES
F G 00 Hours F G To set
Set hours Adjust Menu
Move
FG
If Parental is already set enter the password when requested. q Age block and Content block options, also have sub menus; repeat step 3 to 4 in sub menu, to set type of blocking and rating.
q 206-3839-01
45
Auto Off
- If there is no input signal, the TV switches to standby mode automatically after 10 minutes.
1
Use the menu button to select the menu shown.
3
Use the volume (F, G) buttons to select On or Off.
Clock Off timer On timer Auto off
-- : -- AM
Off
Clock Off timer On timer Auto off
Off
DE
Move
G
Next Menu
DE
Move
FG
Adjust Menu
q
Each press of volume (F, G) buttons toggles between On and Off.
On
Off
2
Use the channel (D, E) buttons to select the the Auto off option.
4
Press the menu button to save.
206-3839-01
46
Key Lock
- The TV can be set up so that it can only be used with the remote control. - This feature can prevent unauthorized viewing.
1
Use the menu button to select the menu shown.
3
Use the volume (F, G) buttons to select On or Off.
Language Captions Caption/Text Key lock Parental Ctl
English Off CC 1 Off
Language Captions Caption/Text Key lock Parental Ctl
English Off CC 1 Off
DE
Move
FG
Adjust Menu
DE
Move
FG
Adjust Menu
q
Each press of volume (F, G) buttons toggles between On and Off.
On
Off
2
Use the channel (D, E) buttons to select the the Key lock option.
4
Press the menu button to save.
- This TV is programmed to remember which option it was last set to even if you turn the TV off.
206-3839-01
47
SPECIAL FEATURES
Maintenance
Caring for your TV Early malfunctions can be prevented. [. . . ]