User manual ZENEC ZEM-W703MRM

[. . . ] The width of the Top-frame corresponds to the total width of your side-by-side combination. Without partition Before you begin Please read all instructions in this manual, as well as the manual which accompanied your machine, before installation and use. [. . . ] This appliance is top-heavy and must be secured to prevent the possibility of tipping forward. Keep the doors closed until the appliance is completely installed and secured per the installation instructions. To reduce the risk of injury or damage to the product, two people should be used for installation. With partition The minimum thickness of the partition is 5/8" (16 mm). If there is a partition with a thickness from 5/8" (16 mm) to 6 5/16" (160 mm) between the adjacent appliances, then each appliance should be individually installed within its own niche using the mounting accessories included. When finding the dimensions for the partition in model 4, note the thickness of the custom door panels and the door handles. ^ Insert the pins into the upper holes, while keeping the heating mat away from the bottom of the appliance i. ^ Adhere the heating mat from top to bottom, and insert the lower pins into the holes j. ^ Hang the cable cover by its hinge on the heating mat and, from below, push into the screws q. Connect the appliances ^ Push the appliances together until the hinge halves interlock. ^ Once the appliances have been pushed together, insert the metal bracket t into the upper and lower plates. 7 en ^ Insert the cover strip into the seam between the appliances. [. . . ] 7 en ^ Insert the cover strip into the seam between the appliances. ^ Place the Top-frame u on the side-by-side combination, hook it into the keyholes, and fasten it to the appliances with the screws v. [. . . ]