User manual ZANUSSI ZQS6140
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ZANUSSI ZQS6140. We hope that this ZANUSSI ZQS6140 user guide will be useful to you.
You may also download the following manuals related to this product:
ZANUSSI ZQS6140 BROCHURE (95 ko)
Manual abstract: user guide ZANUSSI ZQS6140
Detailed instructions for use are in the User's Guide.
[. . . ] . page 14
Cleaning the central filters, cleaning the large filter, internal and external cleaning . . page 15
TECHNICAL SPECIFICATIONS
ZDW 416 FS ZDW 416 BU
DIMENSIONS
Width Height with worktop Height without worktop Max depth Max depth with door open Voltage
cm 60 cm 85 cm 82 cm 60 cm 120
cm 59, 6 cm 81, 8 ÷ 87, 8 cm 55, 5 cm 115 220- 240 V/50Hz 200 W 1900 W 2100 W 5 N/cm2 80 N/cm2 12
ELECTRICAL CONNECTION MOTOR RATING DURING WASHING POWER OF HEATING ELEMENT OVERALL POWER WATER SUPPLY PRESSURE
minimum maximum
CAPACITY (STANDARD IEC PLACE SETTINGS) CONSUMPTION: Water Electricity
22 lt 1. 5 kW/h
PID10GB
2
WARNINGS
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. You MUST read them carefully before installing or using the appliance.
s s
Under no circumstances should you attempt to repair the machine yourself. [. . . ] (See figures).
A A
CA02 CA03
ZDW 416 FS
ZDW 416 BU
The water pressure must be within the limits given in the technical specifications, as it will not function correctly if pressure is outside these specifications. Warning: the retaining ring must be properly fitted so as to avoid water leaks. Note: the end of the hose connected to the machine can be positioned as required, by simply slackening the retaining ring. Re-tighten the ring securely to avoid water leaks.
CA06
Ø 18 Ø 21
min 4 cm
Ø
21 18
Avoid bends or kinks in the hose, which could prevent or slow down the flow of water. If the machine is connected to new pipes or pipes which have not been used for a long time, you are advised to run the water for a few minutes before connecting the inlet hose. This will prevent deposits of sand or rust clogging the inlet hose filter.
Ø
max 100 cm
+ 2 m max
min 30 cm max 100 cm
Electrical connection Water supply connections
This dishwasher may be fed with either hot (max. A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot. For making the connection itself, the coupling nut fitted to the machine's supply hose is designed to screw onto either a 3/4 inch gas thread spout, or to a purpose-made quick-coupling tap such as the PressBlock. Before plugging the appliance into the wall socket, make sure that: 1. the mains voltage corresponds to the voltage given in the technical specifications; 2. the meter, fuses, mains power supply and wall socket can all take the maximum load required. Refit the basket in the higher position and replace the stops (A) in their original position. A
RC01
US13
IEC 436 / DIN 44990
When the top basket is in the higher position it will only take plates up to 20 cm in diameter and you will not be able to use the raised cup-racks.
US12
Caution When loading the dishes, ensure that you do not cover the water inlet funnel in the middle of the upper basket.
US16
US16
Before closing the door, ensure that the spray arms can rotate freely.
PCE25GB
10
HELPFUL HINTS
For best washing results:
Before loading, remove all scraps of food and soak very heavily soiled pots and pans. Tilt items with convex or concave surfaces so that the water drains off easily. Avoid contact between the dishes as far as possible; correct arrangement of the items will give better washing results. Light items (plastic bowls etc. ) should be loaded in the upper basket and arranged so that they do not move during washing. You will improve drying results by leaving the dishwasher door ajar for at least 15-30 minutes as soon as the programme finishes. Care must be taken when opening the door, as steam will escape.
Items not suitable for dishwashers
The following should not be washed in the dishwasher: Cutlery or dishes with wooden or horn handles or glued parts. Certain types of decoration can discolour when washed in a dishwasher. Crystal-ware and plastic objects, if not guaranteed dishwasher-proof, should be washed by hand. You are advised to place them in the upper basket and to select a delicate programme. Certain types of glass can also become opaque after being washed several times in a dishwasher. [. . . ] Measure out detergent
Pour the required amount of detergent into the dispenser according to the indications in the Washing Programmes chart and close the lid. Close the dishwasher door.
Caution In general it is not advisable to open the door while the machine is working; if the door is opened however, a safety device ensures that the machine stops. If you have to open the door while the machine is working, always switch off the appliance first by pressing the ON/OFF button . Set the programme
Turn the Programme Selector Dial clockwise until the letter of the programme you wish to select corresponds with the Green Marker on the window.
A
SO86
PSO09GB
13
MAINTENANCE AND CLEANING
Cleaning the central filters
(After each wash) Inspect the central filters (B) and (C) and remove any scraps of food with a brush, under running water. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ZANUSSI ZQS6140
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ZANUSSI ZQS6140 will begin.