User manual ZANUSSI ZNF21X BROCHURE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ZANUSSI ZNF21X. We hope that this ZANUSSI ZNF21X user guide will be useful to you.
You may also download the following manuals related to this product:
ZANUSSI ZNF21X BROCHURE (56 ko)
Manual abstract: user guide ZANUSSI ZNF21XBROCHURE
Detailed instructions for use are in the User's Guide.
[. . . ] Tips and information about economical and ecological use of the machine are marked with this symbol.
Our contribution to the protection of the environment: we use recycled paper.
2
132992280 gb. qxd
4/7/03
10:11 AM
Pagina
3
(Nero/Process Black pellicola)
Warnings
ENGLISH
The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance.
Installation
· All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed. · Any electrical work required to install this appliance must be carried out by a qualified electrician. [. . . ] Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks.
The drain hose must not be kinked.
P1118
P0021
The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use.
For a correct functioning of the machine the drain hose must remain hooked on the proper support piece situated on the top part of the back side of the appliance.
Electrical connection
This machine is designed to operate on a 220-230 V, single-phase, 50 Hz supply.
Water drainage
The end of the drain hose can be positioned in three ways: Hooked over the edge of a sink using the plastic hose guide supplied with the machine. In this case, make sure the end cannot come unhooked when the machine is emptying. This could be done by tying it to the tap with a piece of string or attaching it to the wall.
Check that your domestic electrical installation can take the maximum load required (2. 25 kW), also taking into account any other appliances in use. The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precaution. Should the appliance power supply cable need to be replaced, this should be carried out by our Service Centre. Please ensure that when the appliance is installed the power supply cable is easily accessible.
P0022
In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground. Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm. the inside diameter of the drain pipe must be larger than the outside diameter of the drain hose.
6
132992280 gb. qxd
4/7/03
10:11 AM
Pagina
7
(Nero/Process Black pellicola)
Your new washing machine
This new machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. · The temperature selector dial will allow you to choose the most suitable temperature for your laundry. The washing machine incorporates a recirculation system which allows an optimal use of the concentrated detergent. Pour liquid detergent into the dispenser drawer compartment marked just before starting the programme. Any fabric softener or starching additives must be poured into the compartment marked before starting the wash programme.
10
132992280 gb. qxd
4/7/03
10:11 AM
Pagina
11
(Nero/Process Black pellicola)
Before the first wash we recommend that you pour 2 litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve. Then run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.
4. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Select the temperature
Turn the dial to the required setting.
95
P0004
M0045
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment . If you wish to carry out the prewash, pour detergent into the appropriate compartment marked .
6. Select the programme and start the machine
Turn the programme selector dial clockwise to the required programme and press ON/OFF button : the mains on light comes on and the machine starts to operate.
3. [. . . ] To facilitate cleaning, the top part of the additive compartments can be removed.
· Place a container close to the pump to collect any spillage. · Release the emergency emptying hose, place it in the container and remove its cap. · When no more water comes out, unscrew the pump cover and remove it. Always keep a rag nearby to dry up spillage of water when removing the pump.
P1115
· Remove any objects from the pump impeller by rotating it.
C0072
C0073
Detergent can also accumulate inside the drawer recess: clean it with an old toothbrush. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ZANUSSI ZNF21X
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ZANUSSI ZNF21X will begin.