User manual YOO DIGITAL I.WIP 2000

[. . . ] ENGLISH EN INDEX _____________________________________ Cautions for safety Product features Parts Before using the product Name of parts Installing the product Descriptions for remote controller buttons Basic cleaning (Automatic cleaning) Using advanced cleaning functions Setup of time and reservation Setup and execution of macros Using the indicator Using through setup of cleaning areas Managing the product Battery usage and management Voice announcement list System error codes list Checkpoints before request for after-sales service Product specifications __________________________________________________________ 06 10 12 13 14 17 20 23 24 32 34 36 38 40 44 46 47 48 49 USER’S MANUAL I. WIP 2000 5 Cau t i o ns f o r S a f e t y _______________________ The instructions with the following caution marks must be carefully read and followed in order to use the product properly and to prevent accident or damage which may occur during the operation of the product. si g nificat i o n des sy mb oles It refers to important information , definitions , general knowledge and references. Important If you do not follow the instruction with this warning icon, a serious injury or property loss may occur. [. . . ] Install the mop guard to meet the mounting hole seen at the bottom of the main body. Main body button Remote controller button (None) Cleanin g t h ro u g h manual c on trol 1 You can manually operate the robot cleaner. €¢ For cleaning, the product starts inhaling air at the site. €¢ When you press the [OK/MANUAL] one more time, the air inhalation will stop. Operate the robot cleaner as you like with the direction keys of the remote controller. €¢ During charging, the manual control is not available. If you only need manual move, not air inhalation, this function is useful. WIP 2000 __________________________________________________________ EN ________________________________________________ Cleaning through manual control 2(control of the motion) When you use the motion control function of the remote controller, you can manually control the robot in a convenient way. Press the button seen below to change the remote controller operation mode for the motion control mode. Important If no operations are detected for five (5) or longer seconds during motion control, the motion control mode will be released. Use the motion shown in the figure below to manually control the robot. [Turning on/off the power - [POWER] button from the remote controller] Quickly flick the front of the remote controller upward. [Turning on/off cleaning mode - [OK/MANUAL] button from the remote controller] Slightly flick the remote controller toward left/ right. WIP 2000 29 Using advanced cleaning functions _______ [Adjusting the sucking power - [VACUUM] button from the remote controller] Slightly pull the remote controller following the arrow. [Moving the robot straightly to the fore/back direction - [UP/DOWN] button from the remote controller] Bend the fore part of the remote controller downward or pull it upward. (Forward move) (Stop) (Backward move) 30 USER’S MANUAL I. WIP 2000 __________________________________________________________ EN ________________________________________________ [Controlling the rotation - [LEFT/RIGHT] button from the remote controller] Turn the remote controller to the left/right. (Turning counterclockwise) (Stop the rotation) (Turning clockwise) 05. To release the remote controller from the motion control mode, press the motion control conversion key again. __________________________________________________________ USER’S MANUAL I. WIP 2000 31 S e t up o f t ime and reservat i o n ______ S e t tin g current time The time setup is available only with the remote controller. Important When you lower down the power switch of the robot cleaner, the time setup will be initialized; you need to make the setup again. [. . . ] 8V DC 800 ml 60 mn 60 mn This wireless system can cause interference of radio waves so that it is not available for services related to safety for human life. : MOL-RYDISR750 Ch arg er Model Dimension Weight Power consumption Input voltage Output voltage Signal transmission distance (IR) RD-750 220, 8 x 120, 1 x 160 mm (LxHxW) TBD 60W 100 - 240V 18vdc, 3, 33 A 5m Capt eur Model Dimension Weight Battery Battery operation time Signal transmission distance (IR) RI-750 89, 7 x 86, 8 x 100 mm (LxHxW) 0, 22 kg D alkaline batteries (LR20); 2EA Approx. WIP 2000 49 __________________________________________________________ S peci f icat i o ns _______________________________ R emot e co n t ro l Model Dimension Weight Power source Signal transmission distance (IR) RC-750 132, 7 x 23, 4 x 46, 9 (LxHxW) 0, 06 kg AAA alkaline batteries (LR03) ; 2EA 10m This wireless system can cause interference of radio waves, and so, it is not available for services related to safety for human life. WIP 2000 51 P RO D U C T WA R R A N TY _________________________ The warranty period for the product and the battery is one (1) year. [. . . ]