User manual YOO DIGITAL COOKYOO 7900

[. . . ] €¢ Any work on the appliance other than normal care and cleaning by the customer must be carried out by an approved service centre. €¢ Do not immerse the appliance, the power cord or the plug in water or in any other liquid. €¢ Do not allow the power cord to hang within the reach of children, to come close to or into contact with the hot parts of your appliance, any other source of heat or any sharp edge. €¢ If the power cord or the plug are damaged, don’t use your appliance . [. . . ] Before using for the first time, clean all parts of the accessories with soapy water . Place the appliance on a flat, clean and dry surface and then plug in your appliance. €© M I X I N G /K N E A D IN G / B E ATIN G/EMU LSIFY IN G/WH I SKI NG (See figure B) Depending on the nature of the ingredients, the bowl (7) with its cover can be used to prepare up to 2. Press button (2) to the release the multifunction head (10) and raise it to a vertical position. Fit the bowl(7) onto the appliance by turning until it locks in position and place the ingredients in it, weighting them as indicated under the weighing function (see figure B). Position the cover on the head with the filling opening at the front of the appliance (see figure B). Fit the desired accessory (11, 12, 13) in the outlet, pushing the shaft of the accessory home and turn it a quarter turn towards you to lock it in position (see figure B). Lower the multifunction head of the appliance to horizontal position and press button again (a click should be heard). During preparation, you can add ingredients through the opening the cover. ENGLISH H OM O G E N IS IN G / MIX ING/BLENDIN G (See figure C) ___________________ Depending on the nature of the ingredients, the blender can be used to prepare up to 1. Assemble the blade assembly to the seal and lock it with a quarter turn clockwise into the bottom of the jug (the jug must be upright). Lower the multifunction heard of the appliance (10) to a horizontal position and press button (2) again (a click should be heard). Ensure that the appliance is at a standstill before latching on the assembled blender. Fit the assembled blender and lock it in position by turning it anticlockwise. Place the ingredients in the blender jug, weighing them as indicated under the weighing function and then fit the cover with the measuring plug. Never fill the mixing jug with boiling fluids, you could allow these to cool down to a room temperature. Otherwise, the appliance could overheat and the glass of the mixing jug could crack. When you use the jug operate ice, you could select nine ices each time and the every ice size is 40MM * 40MM * 20MM. Take the body (Cutter housing 22) by the feed tube with the largest opening upwards. Insert the worm shaft 16 (drive pins first ) in the cutter housing 22. Place the selected hole-plate over the blades ensuring that the two lugs fit in the two cut-outs in the body (see the figure D). Play the multifunction head in the horizontal position (a click should be heard). [. . . ] Fit the flat pasta making attachment and follow the previous instructions. Never immerse the motor until in water or put it under running water wipe it with a soft dry or slight damp cloth. Wash , rinse and wipe the accessories or the can be put in the dishwasher, except for the metal components of the mincer attachment body Fine grinding disc(14), Medium grinding disc(15), Worm shaft(16), Cutter blade (17), Coarse grinding disc (18) and Screw ring(19). If your accessories are discoloured by food (carrots, oranges etc), rub them gently with kitchen towel dipped in cooking oil and then clean in the usual way. [. . . ]