User manual X10 SW10E DATASHEET
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual X10 SW10E. We hope that this X10 SW10E user guide will be useful to you.
 |
X10 SW10E DATASHEET: Download the complete user guide (74 Ko) |
You may also download the following manuals related to this product:
Manual abstract: user guide X10 SW10EDATASHEET
Detailed instructions for use are in the User's Guide.
[. . . ] [. . . ] The unit controls the position of a shutter or a blind either in response to X10 signals received on the powerline or manually from pushbuttons on the front face of the unit. If the serial control message is in STANDARD X10 format, the unit can be: - Fully opened in response to "unit code" "On" - Fully closed in response to "unit code" "Off" - Opens in response to "unit code" "Bright" - Closes in response to "unit code" "Dim" Each "Dim" or "Bright" message will move the motor by 4% of the opening. If the message is in PROFESSIONAL X10 format, then any position can be possible with a single message. The unit is currently supplied with cover plate Jung CD 500 and mounting frame.
Technical data
· Supply voltage: 230V +10% -15% 50 Hz · Power consumption: < 1W · Making capacity: 6 A - 250 VAC (motors) · EMC emission: according to EN 50081-1 · EMC immunity: according to EN 50082-1 · Electrical safety: according to EN 60950 and EN 60065 · Signal sensitivity: 50 mVpp min. [. . . ] [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE X10 SW10E
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual X10 SW10E will begin.