User manual WHIRLPOOL WRS965CIAH ENERGY GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WRS965CIAH. We hope that this WHIRLPOOL WRS965CIAH user guide will be useful to you.


WHIRLPOOL WRS965CIAH ENERGY GUIDE: Download the complete user guide (403 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL WRS965CIAH DIMENSION GUIDE (87 ko)
   WHIRLPOOL WRS965CIAH USE & CARE GUIDE (1714 ko)
   WHIRLPOOL WRS965CIAH INSTALLATION GUIDE (408 ko)
   WHIRLPOOL WRS965CIAH WARRANTY INFORMATION (120 ko)

Manual abstract: user guide WHIRLPOOL WRS965CIAHENERGY GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] · Never remove the round grounding prong from the plug and never use a two-prong grounding adapter. · Always keep your working area dry. CAUTION · Use care when moving and handling the unit. · Do not install the unit behind closed doors or in any way that would obstruct airflow to the front grille, which may cause the unit to malfunction. Tools/Materials Required · Screwdrivers -- slotted and Phillips head · 1/4-inch thick door panel material and cutting tools (15R units) Inspection Unwrap and inspect the unit on a flat, level surface capable of supporting its entire weight. 02/2005 3 www. U-LineService. com 15R and 15WC Models Exterior Cleaning (As Required) Black Models: · Black surfaces may be cleaned with a mild detergent and warm water solution. Stainless Models: · Stainless door panels, handles and frames can discolor when exposed to chlorine gas, pool chemicals, salt water or cleaners with bleach. [. . . ] Always finish this process with Claire Stainless Steel Polish and Cleaner or comparable product to prevent further problems. · Use of abrasive pads such as Scotchbrite will cause the graining in the stainless to become blurred. · Rust that is allowed to linger can penetrate into the surface of the stainless steel and complete removal of the rust may not be possible. 3 Prepare Site Your U-Line product has been designed for either freestanding or built-in installation. When built-in, your unit does not require additional air space for top, sides or rear. However, the front grille must NOT be obstructed and clearance is required for electrical connection in the rear. Note: Unit can NOT be installed behind a closed cabinet door. Cut-Out Dimensions See Electrical Specifications for Power Supply 34-1/8" to 35" 23-1/8" 7" 1-1/2" 15-3/16" Figure 1 Follow the cut-out drawing in Figure 1. The 15-3/16" width allows 1/4" for ease in installation and removal of the unit. The unit is 23-1/8" deep including the door and not the handle on Stainless models and 23-1/8" deep including the handle on Black models (see Figure 2). www. U-LineService. com 4 02/2005 15R and 15WC Models Product Dimensions 23-1/8" Including Handle 23-11/16" Including Handle Door Swing/Clearances Information Black 15R units have a zero clearance for the door to open 90° (see Figure 3). U-line recommends a minimum clearance of 1/4" for black units and 11/16" for Stainless units to accommodate the handle if the unit is installed next to a wall or similar type of structure. Wall 1/4" Min. Wall 11/16" Min. 34" 34" 20-7/8" 20-7/8" 14-15/16" Black Refrigerator 15R and Black Wine Captain® 15WC 14-15/16" Stainless Refrigerator 15R and Stainless Wine Captain® 15WC 16-1/2" 90° Door Swing 90° Door Swing 16-1/2" Figure 2 Please note that the unit has adjustable feet that can add one additional inch to height during leveling or to match adjacent cabinets (see Figure 22 on Page 10). Black Refrigerator 15R and Black Wine Captain® 15WC Stainless Refrigerator 15R and Stainless Wine Captain® 15WC Figure 3 02/2005 5 www. U-LineService. com 15R and 15WC Models Reversing the Door All units may be left- or right-hand opening. Black 15R Units Note: The grille should not yet be installed. Relocate plastic spacer/ bushing on bottom of door to opposite side, and place door on bottom hinge pin. Clean out bushing hole in door bottom with a screwdriver if necessary. Custom door panels can be flat or raised, as long as the maximum panel thickness where inserted into the door reveal (channel) is 1/4"-thick. For raised panels, the depth of the reveal is 1/4" on all four sides. IMPORTANT Raised panels will reduce the door's 90° swing/zero clearance if the unit is installed next to a wall or similar type of structure (see Page 5). Custom 1/4" Dimensions for Black units: Width: Height: 13-15/16" 28-5/32" 34-1/8" to 35" 7" 23-1/8" Custom 1/4" Dimensions for Stainless units: Width: Height: 13-15/16" 29-13/32" 1/4" Space Between Appliances The door panel must not weigh more than 20 lbs. 1-1/2" Door Panel Installation Install the insert as follows: Figure 15 CAUTION Use care when handling the insert. Go on to 5 Adjust Door. 02/2005 9 www. U-LineService. com 15R and 15WC Models 6 Prepare Power Supply 7 Level the Unit Electrical Specifications CAUTION Electrical installation must observe all state and local codes. This unit requires connection to a grounded (threeprong), polarized receptacle that has been placed by a qualified electrician. The unit requires a grounded and polarized 115 VAC, 60 Hz, 15A power supply (normal household current). An individual, properly grounded branch circuit or circuit breaker is recommended. GFCI (ground fault circuit interrupter) is usually not required for fixed location appliances and is not recommended for your unit because a GFCI could be prone to nuisance tripping. See Figure 20 for recommended receptacle location. Leveling Information Note: It is recommended that the unit is level. Use a level to check the levelness of the unit from front to back and from side to side. Level should be placed along top edge and side edge as shown (see Figure 21). Check Level Figure 21 2. [. . . ] The unit's top surface should be approximately 1/8" below the countertop. 4. Place the two hook-hinges (located on the rear bottom side of the grille) onto the front lip of the unit base. Swing the grille up into position, aligning the grille screw hole on the grille to the grille screw hole on the cabinet. See Figure 24. Grille Hook-Hinge Unit Base Front Lip Grille Installation 1. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WRS965CIAH




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WRS965CIAH will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.