User manual WHIRLPOOL WRF989SDAH ENERGY GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WRF989SDAH. We hope that this WHIRLPOOL WRF989SDAH user guide will be useful to you.


WHIRLPOOL WRF989SDAH ENERGY GUIDE: Download the complete user guide (42 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL WRF989SDAH DIMENSION GUIDE (94 ko)
   WHIRLPOOL WRF989SDAH USE & CARE GUIDE (4105 ko)
   WHIRLPOOL WRF989SDAH WARRANTY INFORMATION (112 ko)

Manual abstract: user guide WHIRLPOOL WRF989SDAHENERGY GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] There is also a kit that can be installed on a HD30N (coin operated model). That kit is a coin counting timer that can be adjusted to accept more than one quarter before activating the dispense mechanism. No other kits are available. Maximum 100oF 126 80 psi Water Pressure* 20 psi * for water station model Check the nameplate, located on the back of the cabinet for specific information. Scotsman reserves the right to make design changes and/or improvements at any time. [. . . ] Listed number is the maximum depth. ICE FILL STATION 8 3/4 [221. 5] HIEGHT 13 1/2 [342. 9] WIDTH 8 1/2 [215. 9] DEPTH 2062. 5 81 1/4" 1351. 3 53 1/4" 650. 6 25 5/8" 152. 4 6" 850. 1 33 1/2" FRONT September 2003 Page 5 RIGHT SIDE WRF989SDAH and HD30 Product Description All models consist of a plastic lined, insulated hopper mounted to a metal base. The hopper contains a 15 blade plastic dispense wheel and a stainless steel sweep arm. The top front of the hopper has a removable door to facilitate maintenance and cleaning of the hopper without removal of the ice machine. The dispense wheel and sweep arm rotate when the ¼ HP dispense drive motor is actuated. The drive motor's actuation is controlled by the agitation timer or the vend switch. When the ice dispense chute is pushed back it moves the actuation lever up. The actuation lever releases the chute door and pushes the vend switch arm up. When the vend switch arm has moved a preset distance the vend switch contacts close, providing power to the dispense drive motor. Ice is delivered to the top end of the ice chute by the dispense wheel and it slides down the chute to the container below. The container rests on a grill, the grill's openings are over the ice catch pan, and any spilled ice goes there. The grill has a flange at the front to help contain the ice if it spills during vending. Follow All Local State and National Codes Ice Machine All models: Place the dispenser in the location where it will be used. Place the ice machine on the dispenser and secure it to the dispenser with the hardware and straps from the ice machine. Install it according to the instructions in the manual included with the ice machine. Fasten Ice Machine to Dispenser Ice Machine Drain, Keep Separate Floor Drain Back View of HD30 Installation Back View of WRF989SDAH Installation September 2003 Page 9 WRF989SDAH and HD30 Final Check List/Initial Start Up 1. Check that a drain, separate from the ice machine, insulated and made of rigid tubing, has been connected to the dispenser. Check that the ice machine has been properly installed per the ice machines installation directions. Check that the ice machine/dispenser assembly is level front to back and left to right. Cleaning and Sanitizing of the Ice Storage Bin: The minerals, chlorine and other impurities in the water are rejected from the water during the freeze cycle of the ice machine. Remove all of the ice stored inside the dispenser bin and shut off the ice maker. EZ Access Door Electrical Shock and Moving Parts Hazard Disconnect Electrical Power Before Beginning Service or Maintenance Procedures. Reach into the opening, locate the hair pin and pull it out of the shaft 7. Pull the dispense wheel off the drive shaft and remove it from the dispenser. [. . . ] Pull the top edge of the front panel forward until the two snaps disengage. If the unit is a coin op model, reach behind the front panel and disconnect the coin mechanism harness from the front panel. If the unit is a water station model, reach behind the front panel and shut off the water supply valve to the water faucet. Pull the ice catch pan forward a few inches until the drain hose can be reached. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WRF989SDAH




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WRF989SDAH will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.