User manual WHIRLPOOL WFW9290FW INSTALLATION GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WFW9290FW. We hope that this WHIRLPOOL WFW9290FW user guide will be useful to you.


WHIRLPOOL WFW9290FW INSTALLATION GUIDE: Download the complete user guide (4177 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL WFW9290FW USE & CARE GUIDE (8366 ko)
   WHIRLPOOL WFW9290FW WARRANTY INFORMATION (162 ko)
   WHIRLPOOL WFW9290FW ENERGY GUIDE (308 ko)
   WHIRLPOOL WFW9290FW DIMENSION GUIDE (590 ko)
   WHIRLPOOL WFW9290FW USE & CARE GUIDE (8366 ko)
   WHIRLPOOL WFW9290FW WARRANTY INFORMATION (162 ko)

Manual abstract: user guide WHIRLPOOL WFW9290FWINSTALLATION GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] Water remaining in washer after use may cause damage in low temperatures. See “Washer Care” in your “Use and Care Guide” for winterizing information. Whirlpool Models* 53¼" 523/4" (1353 mm) (1340 mm) 383/4" - 393/4" (948 mm - 1010 mm) 335/16" (846 mm) 27" (686 mm) All dimensions show recommended spacing allowed, except for closet door ventilation openings which are the minimum required. [. . . ] Floor drain system requires a Siphon Break Kit (Part Number 285834), 2 Connector Kits (Part Number 285835), and an Extension Drain Hose (Part Number 285863) that may be purchased separately. ) 4 ELECTRICAL REQUIREMENTS INSTALLATION INSTRUCTIONS NOTE: To avoid floor damage, set washer onto cardboard before moving it. It is recommended that a separate circuit breaker serving only this appliance be provided. N This washer is equipped with a power supply cord having a 3 prong grounding plug. N To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong, grounding-type outlet, grounded in accordance with local codes and ordinances. If a mating outlet is not available, it is the personal responsibility and obligation of the customer to have the properly grounded outlet installed by a qualified electrician. N If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate. N Check with a qualified electrician if you are not sure the washer is properly grounded. For floor drain installations, you will need to remove the drain hose form from the end of the drain hose. 5" (114 mm) of drain hose should be inside standpipe; do not force excess hose into standpipe or lay on bottom of laundry tub. Repeat this step with the hose labeled cold for the cold water faucet. IMPORTANT: Do not overtighten or use tape or sealants on valve when attaching to faucets or washer. In most standard configurations, hoses will cross over each other when attached correctly. Clear water lines Run water for a few seconds through hoses into a laundry tub, drainpipe, or bucket to avoid clogs. Connect inlet hoses to washer LEVEL WASHER Leveling your washer properly reduces excess noise and vibration. IMPORTANT: Do not overtighten or use tap or sealants on valve when attaching to faucets or washer. [. . . ] Then turn the leveling foot clockwise to lower the washer or counterclockwise to raise the washer. Recheck levelness of washer and that all four feet are firmly in contact with the floor. HELPFUL TIP: You may want to prop up front of washer about 4" (102 mm) with a wood block or similar object that will support weight of washer. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WFW9290FW




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WFW9290FW will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.