User manual WHIRLPOOL WAS 4349 INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WAS 4349. We hope that this WHIRLPOOL WAS 4349 user guide will be useful to you.


WHIRLPOOL WAS 4349 INSTRUCTION FOR USE: Download the complete user guide (420 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL WAS 4349 KURZANLEITUNG (149 ko)
   WHIRLPOOL WAS 4349 MODE D'EMPLOI (422 ko)
   WHIRLPOOL WAS 4349 GEBRUIKSAANWIJZING (426 ko)
   WHIRLPOOL WAS 4349 BEDIENUNGSANLEITUNG (428 ko)
   WHIRLPOOL WAS 4349 INSTRUZIONI PER L'USO (2883 ko)
   WHIRLPOOL WAS 4349 TABLEAU DE PROGRAMMES (146 ko)
   WHIRLPOOL WAS 4349 PRODUCT-INFORMATIEBLAD (146 ko)
   WHIRLPOOL WAS 4349 PROGRAM CHART (146 ko)
   WHIRLPOOL WAS 4349 PRODUCT-INFORMATIEBLAD (146 ko)

Manual abstract: user guide WHIRLPOOL WAS 4349INSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] Contents Before using the washing machine Accessories/Supplied Parts Installation Precautions and general recommendations Description of the washing machine Door Child safety Before the first wash cycle Preparing to wash Detergent and Additives Removing the Filter Draining Residual Water Care and Maintenance Trouble-Shooting Guide After Sales Service Transport/Handling 22 Before using the washing machine 1. Remove the packaging and check • After unpacking, make sure that the washing machine is undamaged. • Keep the packaging materials (plastic bags, polystyrene parts, etc. ) out of the reach of children; they can constitute a possible source of danger. 4. Water inlet • Connect the water supply inlet hose in accordance with the regulations of your local water company (see “Installation/ Connect the water inlet hose”). • Water inlet: • Tap: Cold water only 3/4 threaded hose connection 100-1000 kPa (1-10 bar). 2. Remove the transit bolts • The washing machine is fitted with a transport bolts to avoid any possible damage to the interior during transport. Before using the washing machine, the transport bolts must be removed (see “Installation/Remove the transit bolts”). • Water pressure (flow pressure): 5. Drain hose • Connect the drain hose to the siphon or hook it over the edge of a sink by means of the “U” bend (see “Installation/ Connect the water drain hose”). [. . . ] Reinsert the plug in the socket. 33 Care and Maintenance Appliance exterior and control panel • Can be washed down with a soft, damp cloth. • Dry with a soft cloth. Door seal • Clean with a damp cloth when necessary. • Check the seal folds for foreign bodies periodically. Filter • We recommend that you check and clean the filter regularly, at least two or three times a year (see “Removing the Filter”). Detergent dispenser 1. Press the release lever in the prewash compartment downward and remove the drawer. Remove the inserts (the siphon from the softener compartment and the coloured insert for liquid detergent). Insert the detergent dispenser in the washing machine. Water hose mesh filter Check and clean regularly. Clean the internal mesh filter and screw the water inlet hose back onto the tap. Pull off the mesh filter from the washing machine connection with universal pliers and clean it. Turn on the tap and ensure that the connections are completely water-tight. For washing machines with Water Stop hose 1. Clean the internal mesh filter and screw the water inlet hose back onto the tap. Turn on the tap and ensure that the connection is completely water-tight. 34 Trouble-Shooting Guide (Valid for all models except “LCD Intelligent Dialogue WAL. . . . ”) Depending on the model, your washing machine is equipped with various automatic safety functions. This enables faults to be detected in good time and the safety system can react appropriately. These faults are frequently so minor that they can be removed within a few minutes. The washing machine stops during the programme (varies depending on model). Check whether: • The “Rinse Hold” light flashes, or the “Rinse Hold” button has been pressed; terminate this special option by pressing the button; • Another programme has been selected and the “Start/Pause” button is flashing. Reselect the desired programme and press the “Start/Pause” button; • The door has been opened and the “Start/Pause” light is flashing. Close the door and press the “Start/Pause” button again; • The “On/Off” button has been pressed and the light is on; • The washing machine safety system has been activated (see “Fault Indicators” table). The washing machine vibrates during the spin cycle. Check whether: • the washing machine is standing horizontal and even on all four feet (see “Installation/Adjusting the feet”); • The transport bolts have been removed. Before using the washing machine, the transport bolts must be removed (see “Installation/ Remove the transit bolts”). The appliance will not start, no lamp lights up. Check whether: • the mains plug is inserted into the socket; • the wall socket is functioning correctly (use a table lamp or similar) to test); Final spin results are poor. The washing machine has an unbalance detection and correction system. If individual heavy items are loaded (a bathmat, bathrobe), this system may reduce the spin speed automatically or even interrupt the spin completely if it detects too great an imbalance even after several spin starts, in order to protect the washing machine. • If the laundry is still too wet at the end of the cycle, add smaller articles of laundry to balance the load and repeat the spin cycle. Check whether: • Spin speed “0” has been selected. The washing machine will not start. . . (varies according to model) and the “Start/ Pause” light flashes. Check whether: • the appliance door is properly closed (child safety); • the “Start/Pause” button has been pressed. Detergent and additive product residues in dispenser at end of wash. Check whether: • the siphon is correctly installed and clean (see “Care and Maintenance”); • sufficient water is entering. The mesh filters in the water connection could be blocked (see “Care and Maintenance”); • When using powder detergent beforehand the coloured insert for dosing liquid detergent has been removed from the dispenser. . . . and the “Start/Pause” light goes on (for models with a digital display a dash appears here). Check whether: • a programme has been selected. . . . and the “On/Off” lamp goes on. Check whether: • the appliance door is properly closed (child safety); • the tap is turned on (see also “Fault in the water supply/ safety hose”); • a programme has been selected. 35 Fault indicators Luminous display “Water tap” “Water Stop” acoustic signal 30 sec 30 sec 30 sec 30 sec Spin speed lights flash flash flash flash Digital display (if fitted) “H” and “F” “P” and “F” from “F4” to “F16” “A” and “F” Fault description “Fault in water supply” “Fault when draining” “Fault in an electrical component” “Water Stop fault” a. [. . . ] Switch the washing machine off, pull out the mains plug and check whether: • The tap is fully turned on; • The water supply pressure is sufficient; • The water supply hose is kinked; • The mesh filters are blocked (see “Care and Maintenance/ Mesh filter in the water connection”); 38 The water is not pumped out of the washing machine. An acoustic signal sounds and the notice “FP” appears in the display. Check whether: • The drain hose is kinked (see “Installation/Connect the water drain hose”); • The pump or the filter is blocked (see “Removing the Filter”). Switch the washing machine on again, select a programme and start the appliance. To rinse the laundry, we recommend a short programme without the addition of detergent. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WAS 4349




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WAS 4349 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.