User manual WHIRLPOOL UXT4136ADS USE & CARE GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL UXT4136ADS. We hope that this WHIRLPOOL UXT4136ADS user guide will be useful to you.


WHIRLPOOL UXT4136ADS USE & CARE GUIDE: Download the complete user guide (2555 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL UXT4136ADS WARRANTY INFORMATION (92 ko)
   WHIRLPOOL UXT4136ADS DIMENSION GUIDE (240 ko)
   WHIRLPOOL UXT4136ADS WARRANTY INFORMATION (92 ko)

Manual abstract: user guide WHIRLPOOL UXT4136ADSUSE & CARE GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] 4 CM) RANGE HOOD Installation Instructions and Use & Care Guide For questions about features, operation/performance, parts, accessories or service, call: 1-800-253-1301 or visit our website at www. RANGE HOOD SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. This symbol alerts you to potential hazards that can kill or hurt you and others. [. . . ] 7 m) 5 INSTALLATION INSTRUCTIONS NOTES: ■ Depending on your model, determine which venting method to use: roof, wall or non-vented (recirculating). Install Brackets It is recommended that the vent system be installed before the range hood is installed. Go to “Venting System” in the “Installation Requirements” section if you need assistance. Before making cutouts, make sure there is proper clearance within the ceiling or wall for the vent system. 2 x 25 mm) flat-head #2 Phillips screws, install the mounting brackets using the upper holes. –  NOTE: For installations to a surface other than drywall, it is recommended that a qualified contractor determine the anchoring method. Prepare Range Hood Align the exterior edge of the mounting brackets with the exterior edges of the upper cabinet. –  ■ Set the range hood on its back on a covered surface. Using a #2 Phillips screwdriver, remove the rectangular damper attached with 3. Using a flat-blade screwdriver, remove the appropriate power supply knockout. 4 cm) Rectangular Vent System Lift the range hood into place and insert the mounting bracket tabs through the slots in the back of the range hood. –  45˚+ 90˚ A A Using a ¹⁄₂" (13 mm) drill bit, drill a hole in each of the dots marked previously on either the wall or upper cabinet. Drill Electrical Opening C C B D D Hold the range hood firmly in place with one hand and bend each mounting tab (A) upward approximately 90°. For a top vented installation: Mark the 4 vent hole locations (C) on the top of the range hood. For a rear vented installation: Mark the 4 vent hole locations (D) on the rear of the range hood. Using a 1¹⁄₄" (3 cm) drill bit, drill the hole in the dot marked previously at the electrical strain relief. OPTIONAL: Using a ¹⁄₈" (3 mm) drill bit, drill pilot holes for the dots marked previously at each mounting tab at an approximate 45° angle in an upward direction. 2 x 16 mm) truss-head screw into the mounting tab (E) on each side of the range hood as shown in the inset. –  Lift the range hood into place, positioning the rear slots over the mounting brackets. Using a Phillips screwdriver, push on the screws that are started into the top mounting tabs and bend the tabs against the cabinet side walls. –  Option 1 - Direct Wire Installations ■ Use a UL Listed/CSA Approved wire connector and connect the 2 white wires (A) together. Use a UL Listed/CSA Approved wire connector and connect the 2 black wires (B) together. [. . . ] Please take a few minutes to review the Troubleshooting or Problem Solver section of the Use and Care Guide, scan the QR code on the right to access additional resources, or visit www. If outside the 50 United States or Canada, contact your authorized Whirlpool dealer to determine whether another warranty applies. ONE YEAR LIMITED WARRANTY WHAT IS COVERED For one year from the date of purchase, when this major appliance is installed, operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Factory Specified Replacement Parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased, or at its sole discretion replace the product. In the event of product replacement, your appliance will be warranted for the remaining term of the original unit's warranty period. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL UXT4136ADS




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL UXT4136ADS will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.