User manual WHIRLPOOL AKM 972/BA INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL AKM 972/BA. We hope that this WHIRLPOOL AKM 972/BA user guide will be useful to you.


WHIRLPOOL AKM 972/BA INSTRUCTION FOR USE: Download the complete user guide (79 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL AKM 972/BA PROGRAMKORT (142 ko)
   WHIRLPOOL AKM 972/BA PROGRAMKORT (142 ko)
   WHIRLPOOL AKM 972/BA KURZANLEITUNG (144 ko)
   WHIRLPOOL AKM 972/BA SCHEDA PROGRAMMI (145 ko)
   WHIRLPOOL AKM 972/BA CUADRO DE MANDOS (147 ko)
   WHIRLPOOL AKM 972/BA TABLEAU DE PROGRAMMES (152 ko)
   WHIRLPOOL AKM 972/BA PRODUCT-INFORMATIEBLAD (146 ko)
   WHIRLPOOL AKM 972/BA PROGRAM CHART (153 ko)
   WHIRLPOOL AKM 972/BA SCHEDA PROGRAMMI (145 ko)

Manual abstract: user guide WHIRLPOOL AKM 972/BAINSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] Wipe with a cloth moistened with hot water and soap or diluted liquid detergent. Do not use abrasive or corrosive products, chlorine products or steel wool. Do not leave acid or alkaline substances, such as vinegar, salt or lemon juice, etc. , on the cooking hob. x Stainless steel surface Clean with a specific commercial product. Note: if the cooking hob is used continuously, the high temperatures produced by the flames may alter the colour of the surface near the burners. Cleaning the burners 1. [. . . ] Note: to avoid damaging the electric ignition device, do not use it when the burners are not in their housing. Cleaning the electric hotplate The electric hotplate must be cleaned when it is lukewarm. Wipe with a cloth moistened with water and salt, and polish with a cloth moistened with oil. 13 M 13 GB 67873 Y N C TROUBLE-SHOOTING GUIDE 1. The burner fails to remain lit: y Repeat the ignition operation, turning the knob to the position with the small flame symbol . The electric ignition device does not work: y Is there a power failure? AFTER-SALES SERVICE Before you call the After-Sales Service: 1. Check the “Troubleshooting guide” above to see if you can eliminate the trouble yourself. Re-start the cooking hob, to check whether correct operation has been restored. Give the following information: x type of malfunction; x model of cooking hob; x service number (i. e. , the number that follows the word SERVICE on the rating plate under the cooking hob and on the guarantee paper); x your complete address; x your telephone number and area code. If any repairs are required, please contact an authorised After-Sales Service, as indicated in the warranty. In the unlikely event that an operation or repair is carried out by an unauthorised technician, always request a certification of the job carried out and insist on the use of original spare parts. Failure to comply with these instructions may compromise the safety and quality of the product. If necessary, the electrical power cable must be replaced exclusively with a power cable having identical characteristics to the original supplied by the manufacturer. This operation must be performed by Customer Service or a qualified electrician. Connection to gas supply The gas supply system must comply with local regulations (see paragraph “National safety regulations”). The connection of the cooking hob to the gas pipe network or gas cylinder must be made by means of a rigid copper or steel pipe with fittings complying with local regulations, or by means of a continuous-surface stainless steel hose complying with local regulations. Important: if a stainless steel hose is used, it must be installed so as not to touch any movable part of the furniture. a b b It must pass through an area where there are no obstructions and where it is possible to inspect it on all its length. 16 M 16 GB 67872/C Y N C INSTALLATION Adjustment to different types of gas If a different type of gas from the one indicated in the plate is used, the cooking hob must be adapted to it. The gas nozzles must be changed by After-Sales Service or a qualified technician. Nozzles not supplied with the appliance must be ordered from After-Sales Service. Connect the cooking hob to the gas shut-off valve by means of a pipe suitable for the type of gas used, in compliance with current local regulations. Note: when liquid petroleum gas is used (G 30/ G 31), the minimum gas setting screws must be tightened as far as they will go. Replacing the injectors (see table in enclosed product description sheet) . Using a socket spanner of the appropriate size, , unscrew the injector to be replaced. [. . . ] Using a socket spanner of the appropriate size, , unscrew the injector to be replaced. For models equipped with a triple crown burner, proceed as shown in figure. x Remove the two screws followed by the cap then replace both injectors as previously described. Replace the cap , ensuring the seal is properly positioned before attempting to use the cooktop. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AKM 972/BA




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AKM 972/BA will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.