Detailed instructions for use are in the User's Guide.
[. . . ] START UP 1. 1 Introduction 1. 2 Features and specification 1. 3 Accessories and equipment 1. 4 Appearance 1. 4. 1 3802 1. 4. 2 3804 1. 4. 3 3806 2. HOW TO SETUP AND CONNECT BASICALLY 2. 1 System Requirement 2. 2 IP Environment Setting 2. 2. 1 For Windows 2000/NT 2. 3 Network configurations in your gateway 2. 3. 1 Static ip address 2. 3. 2 DHCP mode 2. 3. 3 PPPoE mode 2. 4 Making a VoIP Call 2. 4. 1 Configure the gateway into the Peer-to-Peer mode 2. 4. 2 Configure the gateway into the GK routed mode 2. 4. 2. 1 The type in GK routed mode 3. COMMAND LIST 3. 1 Hyper Terminal Setting 3. 2 Command List 3. 2. 1 [help] command 3. 2. 2 [quit] command 3. 2. 3 [debug] command 3. 2. 4 [reboot] command
2 3 3 3 4 5 5 6 7 9 9 10 10 12 14 16 17 18 19 21 22 24 24 27 27 27 28 28
FXSO H. 323 Gateway User Manual
Document Ver. : 177A Release OCT. , 2003
3. 2. 5 [flash] command 3. 2. 6 [commit] command 3. 2. 7 [ifaddr] command 3. 2. 8 [time] command 3. 2. 9 [ping] command 3. 2. 10 [greetrd] command 3. 2. 11 [pbook] command 3. 2. 12 [pppoe] 3. 2. 13 [ddns] command 3. 2. 14 [sysconf] command 3. 2. 15 [h323] command 3. 2. 16 [voice] command 3. 2. 17 [tos] command 3. 2. 18 [tone] command 3. 2. 19 [support] command 3. 2. 20 [group] command 3. 2. 21 [bureau] command 3. 2. 22 [prefix] command 3. 2. 23 [rom] command 3. 2. 24 [passwd] command
29 29 30 32 32 33 35 38 38 40 44 46 48 49 50 51 53 54 55 57
1
FXSO H. 323 Gateway User Manual
Document Ver. : 177A Release OCT. , 2003
Steps in configuration
STEP 1 Start Up
To check out the peripheral equipments and understand the feature of this gateway. Please read this step very carefully before starting the configuring.
Connecting the gateway and computer to start configuring by WEB GUI.
STEP 2 How to Setup and Connect basically
Setting the ip address for this gateway to make sure that it could connect with the internet. [. . . ] When using this command, users have to specify the record's index number, and then make the change.
Phonebook Rules:
To meet the requirements of communicating with trunk gateway or other applications, Phonebook has following characteristics to be noticed. When the destination side is a terminal, for ex: IP Phone or soft phone, e164 number stands for exact destination phone number. When the destination side is a gateway, for ex: T1/E1 gateway, e164 phone number stands only for gateway prefix. That is to say, users have to continue to dial destination number, following the prefix number. A example is as below: A WellGate FXO GateWay In Phonebook, there's a record : Index Name IP E164
1 B_gateway 192. 168. 1. 2 0 ------------------------------------------------------------------------------------------B E1 trunk gateway, which connects to PSTN with E1 PRI. If users want to make a call to PSTN number "82265699", they have to pickup one of the phone connected to WellGate FXO GateWay, and then dial "082265699". After receiving the complete dialed number, WellGate FXO GateWay will search for its Phone Book, find "0" as matched prefix, and then dial out to B's IP address directly with destination e. 164 (phone number) "82265699". Pleased be noted that "0" is eliminated from WellGate FXO GateWay itself. Because of above characteristics, users have to take care of the number plan very well to avoid the numbering conflict. If users already defined "0" for specific trunk gateway, other terminal started with "0" shall be avoided, or the number will be routed to the trunk gateway defined "0". If user wants to set 2 sets of similar e164 such as 123 and 1234, please be careful configure 123 first, or it may cause problem when user dial 1234, WellGate FXO GateWay may dials
37
FXSO H. 323 Gateway User Manual
Document Ver. : 177A Release OCT. , 2003
out IP address of 123. (1) If called party is FXO product, please set e164 of pbook as e. 164 of called party, and remember to set sysconf drule in_drop "e. 164"(refer to 5. 12. )in called party. (2) If called party is FXS product, please set e164 of pbook as prefix of called party, when dialing to different line of FXS product, please dial line number.
3. 2. 12 [pppoe]
Display PPPoE related information. --------------------------------------------------------------------------------------------------PPPoE device information and configuration Usage: pppoe [-print]|[-open]|[-close] pppoe [-dev on/off][-id username][-pwd password] -print Display PPPoE device information. --------------------------------------------------------------------------------------------------Paremeter Usage: -print print PPPoE status. -dev Enable PPPoE Dial-up function -open Open the connection -close Close the connection -id Input the User name ID provided by ISP -pwd Input the User name password provided by ISP -reboot Reboot the PPPoE connection.
3. 2. 13 [ddns] command
Support the DDNS function -------------------------------------------------------------------------------------------------
38
FXSO H. 323 Gateway User Manual
Document Ver. : 177A Release OCT. , 2003
Parameter Usages: -enable enable the DDNS function -server enter the server address of the DDNS server you use -hostname enter the domain name address which you get from the DDNS server -id key in your id -passwd key in your password -checkIP enable or disable the check current user's IP address
39
FXSO H. 323 Gateway User Manual
Document Ver. : 177A Release OCT. , 2003
-checkIPsrv1 enter the IP address of the check server -checkIPsrv2 the secondary IP address of the check server -delay service delay time -force execute the DDNS function all the times Note: Support DDNS Server: www. 3322. org, www. dyndns. org.
3. 2. 14 [sysconf] command
This command displays the system information and configuration. -------------------------------------------------------------------------------------------------
40
FXSO H. 323 Gateway User Manual
Document Ver. : 177A Release OCT. , 2003
- service: 0 Dial In Service in Dial In Service, WellGate FXO GateWay will pick up incoming calls from PSTN,
41
FXSO H. 323 Gateway User Manual
Document Ver. : 177A Release OCT. , 2003
play pre-recorded voice greeting or, and then have users to make a 2nd dial to destination.
1/2 HotLine Service (this feature must be implemented after set bureau table command) HotLine Service provides Hot Line function, which connects directly to pre-defined destination. For ex: if L1 of WellGate FXO GateWay is assigned to destination address 192. 168. 1. 12 in Hot Line Mode. When users from PSTN make a call to L1 of WellGate FXO GateWay, it will directly connect to 192. 168. 1. 12 without a 2nd dial. 3 The connect signal will sent to IP side if gateway detect the reverse signal. It is using the billing application.
- ringdet: to define ring detection method. (0 is for old hardware version; 1 for new hardware version) - plan: It is for setting dial-numbering plan. [. . . ] to switch ON/OFF (1 = ON; 0 = OFF) T. 38 function. T. 38 function is for FAX. Fast Start function can shorten the connection time if the opposite party also support FastStart. If the function is ON, WellGate FXO GateWay will send H. 245 (Call Control messages) via H. 225's (Call Signal messages) link. it is not recommended to change the value in this command, only if users do know well the application. [. . . ]