User manual VOLKTEK NVF-7221 QUICK INSTALLATION GUIDE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual VOLKTEK NVF-7221. We hope that this VOLKTEK NVF-7221 user guide will be useful to you.
Manual abstract: user guide VOLKTEK NVF-7221QUICK INSTALLATION GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] Video signal specifications Protocol: Video bandwidth: PAL, NTSC 8MHz <10
-9
Power Stand alone box: AC DC External power adaptor +12VDC
Quick Installation Guide NVF-7211/NVF-7221
1. [. . . ] The NVF-7200 series can be deployed in NXF-711 1-slot, NXF-717 4-slot and NXF-719 2-slot chassis.
Bit Error Rate: Video input/output voltage: input/output impedance: Video resolution: DG: DP: SNR: Connectors and cables Video: Video IN: Video OUT: BNC
1V P-P Video 75 ohm 8 Bit <1% <0. 6 >60dB Mechanical Dimensions: Weight: Environment Operating temperature: -10 C~70 C Humidity: Compliance: MTBF: 5~95% (Non-condensing) FCC/CE >100, 000 Hours
0 0
109. 2 x 73. 8 x 23. 4 mm 160g
connects to camera connects to monitor
Fiber connectors: FC/ST Single mode fiber: 9/125µm Multimode fiber: 50/125, 62. 5/125µm LED Indicators:
PWR: ON: Indicates normal power F: V:
3. Naming rules
VIDEO CONVERTER - Video only NVF-7211TM (1V, 2 km) 1-ch Video Transmitter, Multi-mode, FC connector NVF-7211RM (1V, 2 km) 1-ch Video Receiver, Multi-mode, FC connector NVF-7211TS (1V, 20 km) 1-ch Video Transmitter, Single-mode, FC connector NVF-7211RS (1V, 20 km) 1-ch Video Receiver, Single-mode, FC connector
ON: Indicates fiber signal is being received ON: Indicates CCTV camera signal is beign received
Data (for NVF-7221 model)
2. Specification
Optical specification Fiber type: Distance: Fiber type: Distance: Wavelength: Multi-Mode 2km Single-Mode 20km, longer distances available upon request 1310nm/1550nm -1-
Data: Protocol: Data rate: LED Indicator:
RS-485/2 wires Half -Duplex up to 128Kbps
D: Flashing when data is
Transmission Distance: 0~1200m transmitting or receiving
-2-
-3-
PREDATA 08/24/2009
VIDEO CONVERTER - Video & Data NVF-7221TM (1V1D, 2 km) 1-ch video Transmitter with data, Multi-mode, FC Duplex connector NVF-7221RM (1V1D, 2 km) 1-ch video Receiver with data, Multi-mode, FC Duplex connector NVF-7221TS (1V1D, 20 km) 1-ch video Transmitter with data , Single-mode, FC connector NVF-7221RS (1V1D, 20 km) 1-ch video Receiver with data , Single-mode, FC connector The following is the naming rule:
4. Hardware Installation Procedure
STEP 1: Connect the AC adaptor to the power input on the rear panel of Transmitter. Alternatively, connect DC +12V power directly to the terminal block in the rear panel. If not, please connect CCTV camera to a monitor to make sure the CCTV camera and cable are in working order. STEP 3:
STEP 6: For NVF-7221 models, please connect 2 wire RS-485 to Transmitter and Receiver. The Data (D) LED will flash when data is being transmitted.
Coaxial cable
OPTICAL FIBER
F V D
RS-485
Coaxial cable Fiber cable
VIDEO OUT
OPTICAL FIBER
F V D
RS-485
TX
RX
GND -
+
TX
RX
GND -
+
VIDEO IN
Monitor
Receiver
Transmitter
Camera
NVF-7211 TM/TS
OPTICAL FIBER
V
NVF-7221 TM
OPTICAL FIBER
F V D
RS-485
NVF-72
1: Video 2: Video+Data Number of video ports T: Transmitter R: Receiver
All models are FC Connectors. [. . . ] VOLKTEK Corporation www. volktek. com support@volktek. com Ph: +886-2-8242-1000 Fax: +886-2-8242-3333
-4-
-5-
-6-
PREDATA 08/24/2009 6400-000008 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE VOLKTEK NVF-7221
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual VOLKTEK NVF-7221 will begin.