User manual VITEK VTD-VPH
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual VITEK VTD-VPH. We hope that this VITEK VTD-VPH user guide will be useful to you.
You may also download the following manuals related to this product:
VITEK VTD-VPH DATASHEET (554 ko)
Manual abstract: user guide VITEK VTD-VPH
Detailed instructions for use are in the User's Guide.
[. . . ] All VTD-VPH domes feature Sony Super-HAD and/or Ex-View Technology with Hi-Resolution of 480 Television Lines.
CONTENTS OF PACKAGE
· One Fully Assembled VTD-VPH Series Dome Camera · One Additional Knock-Out Plug · One Tamper-Proof Wrench · One Rubber Sealer Mat · One Instruction/Installation Manual · Assorted Additional screws for Convenience
INSTALLATION OVERVIEW
Your VTD-VPH Dome Camera is designed to be flush or ceiling mounted on a wall or ceiling and comes complete with a surface mount rear casing including conduit knockouts. Its patented 3-axis gimbal allows for perfect viewing angles on any vertical or horizontal surface. The VTD-VPH Dome Camera is weather sealed for indoor or outdoor locations.
WIRING CONNECTIONS
The VTD-VPH Dome Camera should be powered by 24 Volts AC. [. . . ] Remove the inner casing from the outer surface mount casing (back box) and temporarily set the inner casing/camera to the side. Secure the outer back box directly to a wall or ceiling using wood screws or anchors. If installing outside, remember to glue the rubber matting to the wall and then attach the back box. Conduit may be attached to the rear or the side of the back box depending on the installation. Re-secure the inner casing with the camera to the back box but remember to attach the wiring before doing so. You may also want to find a desirable angle of view and adjust the iris and focus before making the final wiring connections.
3
CAMERA SETUP
Your VTD-VPH Dome Camera has been set at average default settings from the factory so the performance should be excellent right from the start. However, certain challenging environments may require additional set-up procedures to enhance the image.
DIP SWITCH SETTINGS
There are four dip switches on the rear board of the camera. The following adjustments may be made:
Dip Switch Adjustments
Dip Switch 1 =
Electronic Shutter Control Leave this switch in the "Off" position if your camera has an auto iris lens. Switch to the "On" position when using a fixed lens version to enhance the camera's ability to react to changing light. Back Light Control Leave this switch in the "Off" position if your camera is being installed outdoors or if the installation is indoors in a controlled lighting environment. Switch to "On" position when installing the camera indoors looking toward windows or doors or if outdoors looking into semi-direct sunlight. Never install camera looking into direct sunlight.
Dip Switch 2 =
Dip Switch 3 =
Flickerless On/Off Flickerless shutter speed for minimizing image flicker under fluorescent lighting. Auto White Balance Switch "On" if the image appears discolored or floats between colors. This will enable the camera to find "White".
Dip Switch 4 =
4
AUTO IRIS LENS ADJUSTMENT
Your DC Auto Iris Lens should be set properly at default from the factory. However, if the picture appears too bright or too dark, the iris function can be adjusted by turning the small silver potentiometer located on the board above the lens.
Auto Iris Adjustment
FIELD OF VIEW AND FOCUS ADJUSTMENT
On all varifocal versions, the width of view may be adjusted by turning the forward lever toward the smaller number for wider and toward the larger number for more telephoto. The Focus may be adjusted by turning the rear lever toward the "W" for near and toward the "T" for far (or telephoto). [. . . ] 160mm x 99mm / 6. 29" x 3. 89" (D x H) Aluminum/Tin Base - Polycarbonate Bubble IP66/68
7
LIMITED LIABILITY WARRANTY
Your new Camera is guaranteed to be free from defects in materials and workmanship for a period of two years from the date of purchase. The product must have been used only for its intended purpose, and not been subjected to damage by misuse, willful or accidental damage, caused by excessive voltage or lightning. The product must not have been tampered with in any way then the guarantee will be considered null and void. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE VITEK VTD-VPH
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual VITEK VTD-VPH will begin.