User manual VITEK VTD-C410
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual VITEK VTD-C410. We hope that this VITEK VTD-C410 user guide will be useful to you.
You may also download the following manuals related to this product:
VITEK VTD-C410 DATASHEET (1052 ko)
Manual abstract: user guide VITEK VTD-C410
Detailed instructions for use are in the User's Guide.
[. . . ] VTD-C410 High Resolution Color
Indoor Dome Camera
LIMITED LIABILITY WARRANTY
VITEK
Your new Camera is guaranteed to be free from defects in materials and workmanship for a period of two years from the date of purchase. The product must have been used only for its intended purpose, and not been subjected to damage by misuse, willful or accidental damage, caused by excessive voltage or lightning. [. . . ] Switch to the "On" position when using a fixed lens version to enhance the camera's ability to react to changing light. Back Light Control Leave this switch in the "Off" position if your camera is being installed outdoors or if the installation is indoors in a controlled lighting environment. Switch to "On" position when installing the camera indoors looking toward windows or doors or if outdoors looking into semi-direct sunlight. Never install camera looking into direct sunlight.
Dip Switch 2 =
Dip Switch 3 =
Flickerless On/Off Flickerless shutter speed for minimizing image flicker under fluorescent lighting. Auto White Balance Switch "On" if the image appears discolored or floats between colors. This will enable the camera to find "White".
Dip Switch 4 =
6
3
DOME SPECIFICATIONS
Image Device Effective Pixels
1/3" Color CCD Image Sensor 768 x 494 480 TV Lines 0. 7 Lux at f1. 2 (AGC On) More Than 48dB (AGC Off) 1/60 ~ 1/100, 000 Sec. Auto White Balance (AWB) 3. 6mm Included (2. 9 / 6. 0 / 8. 0 / 16mm Optional) Composite: 1. 0 Vp-p / 75 Ohm 12VDC / 24VAC 4. 73" x 2. 96" / 120mm x 75mm (W x H) 0. 66 lbs. / 300g
WIRING CONNECTIONS
The VTD-C410 Dome Camera should be powered by 12 Volts DC or 24 Volts AC. You should make sure that the power supply you are using is CSA Certified Class 2 Power Supply delivering a minimum of 2. 5 Watts. Twisted pair or CAT-5E cable may also be used with optional VT-TR1M Passive Video Transceivers. [. . . ] If the camera view is obstructed by scratches, remove the front plate (bezel) and rotate the bubble to a portion that is not scratched. If the dome becomes damaged or scratched beyond use, contact your distributor to order a replacement.
Focus Adjustment
4
5 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE VITEK VTD-C410
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual VITEK VTD-C410 will begin.