Detailed instructions for use are in the User's Guide.
[. . . ] Type #: Phillips St4x12 Length: 12mm / Diameter: 4mm Qty: 4 Dowels If necessary, use the to help secure the self tapping screws. Length: 30mm / Diameter: 7mm Qty: 4
1
AVAILABLE MODELS / ACCESSORIES
INDOOR MIGHTY DOME CONFIGURATIONS:
VTD-MH2910 / MH922: Indoor Color Dome Camera w/2. 9-10mm or 9-22mm Varifocal Lens & 480TVL VTD-MX2910 / MX922: Indoor Color Dome Camera w/2. 9-10mm or 9-22mm Varifocal Lens & 550TVL
IR MIGHTY DOME CONFIGURATIONS:
VTD-MVH2910/L35 / MVH922/L35: Vandal Proof Color Dome Camera w/2. 9-10mm or 9-22mm Varifocal Lens, 480TVL & 35 IR LED's VTD-MVX2910/L35 / MVX922/L35: Vandal Proof Color Dome Camera w/2. 9-10mm or 9-22mm Varifocal Lens, 550TVL & 35 IR LED's
VANDAL-PROOF MIGHTY DOME CONFIGURATIONS:
VTD-MVH2910 / MVH922: Vandal Proof Color Dome Camera w/2. 9-10mm or 9-22mm Varifocal Lens & 480TVL VTD-MVH2910DN / MVH922DN: True Day/Night Vandal Proof Color Dome Camera w/2. 9-10mm or 9-22mm Varifocal Lens & 480TVL VTD-MVX2910 / MVX922: Vandal Proof Color Dome Camera w/2. 9-10mm or 9-22mm Varifocal Lens & 550TVL VTD-MVX2910DN / MVX922DN: True Day/Night Vandal Proof Color Dome Camera w/2. 9-10mm or 9-22mm Varifocal Lens & 550TVL
WDR MIGHTY DOME CONFIGURATIONS:
VTD-MX2910/922/1850-WDR: Indoor Color Dome Camera w/550 TV Lines and 2. 9-10mm, 9-22mm, or 18-50mm Lens VTD-MVX2910/922/1850-WDR: Vandal Proof Color Dome Camera w/550 TV Lines and 2. 9-10mm, 9-22mm, or 18-50mm Lens
Optional Mounts & Accessories:
VT-MD-2VOC: Secondary Video Output Cable for Mighty Domes Heater/Blower Option: Heater/Blower Option for Mighty Domes UTP Option: UTP Option for Mighty Domes IP Module: IP Option for Mighty Domes VT-MD/WMT: Mighty Dome Wall Mount VT-MD/CMT: Mighty Dome Pedestal Ceiling Mount
2
MIGHTY DOME LAYOUT
1) Lens 2) Power Input Connector(12VDC / 24VAC) 3) Video Output Connector - BNC 4) Camera Holder and 2nd Video output 5) Ball with the Camera Assembly 6) Safety Wire
8) Dome Cover Ring 9) Flush Mount Base 10) Surface Mount Plate 11) Assembly Screws - Torx M4x9 (Vandalproof) 12) Assembly Screws - Phillips ST4x12 (Indoor) / Phillips M4x10 (Vandalproof / IR) 13) Mounting Screws - Phillips ST4x30
7) Bubble
3
INSTALLATION
1) Dome Cover 1. 1 Vandal Proof Domes - Use the provided Torx wrench to unscrew the vandal proof screws and remove the dome cover. 1. 2 Indoor Domes - Turn the dome cover to the left to remove the dome cover. 2) Flush Mount Installation: Using four St4x30 screws, attach the flush mount base to a sturdy surface. [. . . ] Illumination S/N Ratio Video Output Effective Pixels Electronic Shutter White Balance Weatherproof Operating Temperature Operating Humidity Power Consumption Power Requirement Dimensions (H x Dia. )
VTD-MVH
VTD-MVX
VTD-MVH(DN) VTD-MVX(DN)
1/3"True Day/Night Super HAD CCD Internal
1/3" Super HAD CCD
2:1 Interlace 2. 9-10mm or 9-22mm 480 TV Lines 550 TV Lines 480 TV Lines 550 TV Lines
Day/Night: 0. 02Lux (F1. 2@40IRE) / Standard: 0. 2Lux (F1. 2@40IRE) More than 50dB AGC OFF at 50IRE 1. 0Vp-p composite, 75 Ohms 768(H) x 494(V) 1/60 ~ 1/100, 000 2000~8000 K Automatic Tracking IP68 14F ~ 122F (-10C ~ +50C) Within 85% RH 3 Watts 12VDC/24VAC Dual Voltage (500 mA Minimum) 4. 45" x 5. 71" (113mm x 145mm)
13
IR MIGHTY DOME SPECIFICATIONS
Specifications
Image Sensor Sync System Scanning system Lens Options Horizontal Resolution Min. Illumination S/N Ratio Video Output Effective Pixels Electronic Shutter White Balance IR LED's Weatherproof Operating Temperature Operating Humidity Power Consumption Power Requirement Dimensions (H x Dia. )
VTD-MVH (L35)
VTD-MVX (L35)
1/3" Super HAD CCD Internal 2:1 Interlace 2. 9-10mm or 9-22mm 480 TV Lines 550 TV Lines
Day/Night: 0. 02Lux (F1. 2@40IRE) / Standard: 0. 2Lux (F1. 2@40IRE) More than 50dB AGC OFF at 50IRE 1. 0Vp-p composite, 75 Ohms 768(H) x 494(V) 1/60 ~ 1/100, 000 2000~8000 K Automatic Tracking 30 LED's with up to 90' Range IP68 14F ~ 122F (-10C ~ +50C) Within 85% RH 3 Watts (IR LEDs Off) / 6 Watts (IR LEDs On) 12VDC/24VAC Dual Voltage (1000 mA Minimum) 4. 45" x 5. 71" (113mm x 145mm)
14
WDR MIGHTY DOME SPECIFICATIONS
VTD-MX (WDR) VTD-MVX (WDR)
Specifications
Image Sensor Gamma Sync System Scanning system Lens Options Horizontal Resolution Min. Illumination S/N Ratio Video Output Effective Pixels Electronic Shutter White Balance WDR Mode Auto Iris Control Slow shutter BLC Zone Presets Flicker reduction OSD Weatherproof Operating Temperature Operating Humidity Power Consumption Power Requirement Dimensions (H x Dia. )
1/3" RGB Color DPS SENSOR (Pixim Orca D1500 series) 0. 45 Internal 2:1 Interlace 2. 9-10mm / 9-22mm / 18-50mm 550 TV Lines 0. 0002Lux with DSS + ICR Modes ON (F1. 2 @ 40IRE) More than 50dB AGC OFF at 50IRE 1. 0Vp-p composite, 75 Ohms 768(H) x 494(V) 1/60 ~ 1/100, 000 2000~11000ºK Automatic tracking 4 presets (Low / Middle / High / Custom ) DC drive iris control. Level control is fixed internally 2X, 4X, 8X, 16X, 32X ESS 4 areas (CTR SPOT, UPPER 1/3, MIDDLE 1/3, LOWER 1/3) NORMAL, INDOOR, OUTDOOR, FL-LIGHT, LOBBY, WAREHOUSE Yes Yes (Setup menu only) IP68 (Outdoor Versions) 14F ~ 122F (-10C ~ +50C) Within 85% RH 3 Watts 12VDC/24VAC Dual Voltage (500 mA Minimum) 4. 45" x 5. 71" (113mm x 145mm)
15
Appendix: WDR Mighty Dome
With CMOS image sensor, - Provides the best quality image without any blooming or vertical smear even under the spot light. With Pixim's DPS technology, - Offers unparalleled image quality across all lighting conditions especially in high-contrast environments such as indoor and outdoor elements combined in the same field of view, or other extreme bright & dark lighting elements combined in the same image. - Delivers natural color - Offers high resolution of 540TVL - Eliminates compromising image noise by blooming or vertical smear - Eliminates color rolling of the NTSC system by line-lock synchronization (AC24V version) - Offers on-screen menu With ICR mechanism, - Enhances sensitivity about 10x at night time - Can accept infrared light With 24VAC/12VDC dual power design, - Offers flexibility in installation - Ensures reliability Main features are; · 1/3" RGB Color DPS SENSOR (Pixim Orca D1500series) · All adjustments by OSD menu · Resolution of 540 Horizontal Lines · 10x sensitivity enhancement by removing the optical filter · Switches to B/W and able to accept the infrared spectrum at night mode · Enhanced sharpness compensation · Very low noise and superior picture quality · Sensitivity of 0. 0002Lux (B&W) · Automatically removable IR Cut Filter · Automatic White Balance (ATW) · Support DC auto iris lens · Supply voltage: 12Vdc/24Vac Dual voltage
16
Appendix: WDR Mighty Dome
WDR SETUP Menu
1) In the menu Use , buttons to move menu, short to select or enter. , buttons to change the settings and press button
button stands for MENU or ENTER button. 2) Entering menu Press button longer than 2 sec on the back of camera.
3) PRESET menu PRESET menu is provided to help the settings with the possible parameters obtained and assumed by the factory tests for the most common environments. "PRESETs may not be the best optimized settings for the actual installations. In such cases, find the optimal settings in CUSTOM setting of EXPOSURE menu"
PRESET <NORMAL> INDOOR OUTDOOR
Descriptions Produces an image that has average contrast and suitable for normal indoor or low-contrast outdoor scenes. Provides better leveling of image for in the darker areas of the scene. Optimized for outdoor sunlit applications and provides better leveling for the brighter areas. Suitable for outdoor scenes having high contrast between sunlit and shadows. Reduces the color rolling by fluorescent lights when line-lock is not available (NTSC). With AC24V supply for the best result against the color rolling if possible. Optimized for the common installation at warehouse
FL-LIGHT
LOBBY WAREHOUSE
17
Appendix: WDR Mighty Dome
4) EXPOSURE menu EXPOSURE menu is provided to help the settings with the possible parameters obtained and Presets are configured by factory tests for most commonly encountered environments. EXPOSURE presets may not be the best optimized settings for the actual installations. In such cases, find the optimal settings in CUSTOM setting of EXPOSURE menu
EXPOSURE <WDR MID> WDR HIGH CUSTOM. . . WDR LOW 5) CUSTOM menu To enter CUSTOM menu, press
Descriptions Medium level of the dynamic range control for each PRESET. If camera stay at NIGHT mode more than 10sec, increase EXIT THRES and repeat the fore mentioned steps. [. . . ] Synchronization is INTERNAL but sync frequency is modified to simulate linelock. Line-lock for AC24V and Internal for DC12V
23
Appendix: WDR Mighty Dome
16) SAVE / RESTORE / EXIT menu
MENU-2 SAVE AND EXIT EXIT NO CHANGES RESTORE FACTORY SETTINGS LANGUAGE VIDEO STANDARD
Descriptions Exits menu after saving the parameters. VIDEO STANDARD does NOT change by RESTORE FACTORY SETTINGS
24
Appendix: WDR Mighty Dome
17) Setup Menu Tree
25
NOTES
26
LIMITED LIABILITY WARRANTY
Your new Camera is guaranteed to be free from defects in materials and workmanship for a period of two years from the date of purchase. The product must have been used only for its intended purpose, and not been subjected to damage by misuse, willful or accidental damage, caused by excessive voltage or lightning. [. . . ]