User manual US ROBOTICS USR1120 REFERENCE GUIDE

[. . . ] Follow the on-screen instructions and wait for some files to be copied to your hard drive. Select Infrastructure Mode if you will be using a Wireless Access Point. After you select your Wireless Mode, click Next. You will be prompted for an SSID. If you do not have an existing wireless network, leave the default setting of ANY and click Next. [. . . ] Click the DNS tab and enter the same DNS address as the one listed under the LAN connection. Windows Me Users: Click Windows Start, Settings, and then Control Panel. Double-click Add/ Remove Programs and then click the Windows Setup tab. Select the direct connection to the Internet from the drop-down menu and click Next. When prompted, create a Home Networking Setup disk to be used for the configuration of Internet sharing in Windows 98, and Me. You will then need to restart your computer. Troubleshooting My computer does not recognize the 11 Mbps Wireless USB Adapter. Possible Solution: The 11 Mbps Wireless USB Adapter may not be properly connected. Check the connections of the USB cable to the 11 Mbps Wireless USB Adapter and to the USB port on your computer. I accidentally clicked Cancel during the Installation procedure. Possible Solution: Remove and reinsert the U. S. Repeat the installation procedure of the software before you install any hardware. The Installation procedure did not begin when I inserted the Installation CD-ROM. Possible Solution: Some programs may keep the autolaunch feature of the Installation CD-ROM from beginning. Close any open applications and reinsert the Installation CD-ROM. The 11 Mbps Wireless USB Adapter is not receiving any power. Possible Solution: If you have the 11 Mbps Wireless USB Adapter plugged into a peripheral device, such as a USB hub or a keyboard, the 11 Mbps Wireless USB Adapter may not be powered. Plug the 11 Mbps Wireless USB Adapter directly into a USB port on your computer. The 11 Mbps Wireless USB Adapter does not work properly and I may need to uninstall the device. Possible Solution: Check and be certain the 11 Mbps Wireless USB Adapter is not in use before removing it. The computer will lock up if the 11 Mbps Wireless USB Adapter is in use and is removed. If the 11 Mbps Wireless USB Adapter is not functioning correctly, perform the following steps: · Click Windows Start, Settings, and Control Panel. Double-click System and uninstall the 11 Mbps Wireless USB Adapter or click Windows Start, Programs, 11 Mbps Wireless USB Adapter, and then Uninstaller. Reinstall the 11 Mbps Wireless USB Adapter and reinstall the correct drivers. · The 11 Mbps Wireless USB Adapter cannot communicate with other computers linked via Ethernet in the Infrastructure configuration. Possible Solution: · Ensure that each computer in the wireless network is powered on. · Ensure that the stations is configured with the same operating radio channel as the 11 Mbps Wireless USB Adapter. If the IDs are different, change the 11 Mbps Wireless USB Adapter and all the stations within the network to another radio channel. · Ensure that each 11 Mbps Wireless USB Adapter is configured with the same security options. · · · · Ensure that the BSS ID for a roaming disabled station is the same as the 11 Mbps Wireless USB Adapter. Alternately confirm that the ESS ID roaming enabled station is the same as the 11 Mbps Wireless USB Adapter. Ensure that you are automatically obtaining the IP address or that you have a correct IP address and subnet mask. Robotics Wireless Access Point, ensure that you can connect to the Access Point and that the preamble mode is set to Long. Reset the Wireless USB Adapters to the default settings and try to connect again. I received a message that my computer shares a name with another computer on the wireless network. Possible Solution: Each computer on the wireless network must have a different name. Refer to your computer's documentation to see how to change the name of your computer. Are You Still Having Problems? 1. [. . . ] ROBOTICS SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT OR MALFUNCTION IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO OPEN, REPAIR OR MODIFY THE PRODUCT, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OTHER HAZARDS, OR ACTS OF GOD. ROBOTICS ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF U. S. ROBOTICS OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT U. S. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. [. . . ]