User manual TP-LINK TL-MR3220

[. . . ] In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. TP-LINK TECHNOLOGIES CO. , LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: AV500+ Powerline Adapter with AC Pass Through Model No. : TL-PA551 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives: Directives 2004 / 108 / EC, Directives 2006 / 95 / EC, Directives 2011/65/EU The above product is in conformity with the following standards or other normative documents： EN 55022:2010 EN 55024:2010 EN 61000-3-2:2006+A1:2009+A2:2009 EN 61000-3-3:2008 EN 50412-2-1:2005 EN 60950-1:2006+A11:2009+A1:2010 The product carries the CE Mark Person is responsible for marking this declaration: Yang Hongliang Product Manager of International Business Date of issue: 2012 TP-LINK TECHNOLOGIES CO. , LTD. Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China CONTENTS Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The Storage temperature is -40℃~70℃ (-40℉~158℉). 1. 3 LED Indicator The LED indicator displays information about the device’s status. 3 TL-PA551 Item Status On Power LED Blinking Off Green Orange Powerline LED Red Off On Ethernet LED Blinking Off Note: AV500+ Powerline Adapter with AC Pass Through Indication The adapter is on. The adapter isn’t connected to any powerline network or is in power-saving mode. The Ethernet port is connected, but there is no data being transferred. The Ethernet port isn’t connected. 5 minutes after the device connected to the adapter is turned off, the adapter will automatically switch to the power-saving Mode. 1. 4 Physical Interface There are four physical interfaces on this Mini Powerline Adapter. Integrated Electrical Socket Power Plug Ethernet Port Pair Button 4 TL-PA551 AV500+ Powerline Adapter with AC Pass Through Interface Ethernet Port Power Plug* Description It is a 10/100Mbps Ethernet port on the AV adapter for connecting it to the PC or the broadband device with the network cable. A Power Plug connected to any 100V ~ 240V AC (50~60Hz) power socket Pair buttons are used to secure a powerline network. Firstly, plug in a new adapter, and press its pair button for 1 second; then plug in another adapter and press its pair button for 1 second as well. After that, wait about 60 seconds so that the two adapters can finish connecting. The integrated electrical socket allows additional devices or multiple sockets to be connected to the adapter just like to a normal wall socket. No electrical socket is lost. Pair Button Integrated Electrical Socket * The provided power plug may differ from the picture due to different regional power specifications. If you press the pair button for more than 10 seconds, the powerline adapter will leave the network which it has joined and its new network name assumes a random value. The Power LED turns off when it disconnects from the powerline network. Password: Displays the supplied Powerline Adapter’s password (Initially left blank). To set the Powerline Adapter password (Which is required when creating a private network or managing all the devices), select the device shown in the figure and click the Modify button. Rescan: Click the “Rescan” button to perform an immediate search of the remote Powerline Adapter. The Management Utility will automatically perform the scanning process and update the display every few seconds by default. Option: Select the device and click the Modify button to display a configuration dialog. There you can change the corresponding adapter’s name and enter its password for future configuration. 4. 2. 1 Rename the Remote Device/Enter Password You can change the name of the remote adapter to an easy-to-remember one. Additionally, you can select the desired adapter and enter its password (Take note of the password format) so as to set the network name of this device on System configuration homepage. To change the name of the remote adapter or enter its password, please follow the steps below: 15 TL-PA551 AV500+ Powerline Adapter with AC Pass Through (1) Select the desired device and click the Modify button to display the following dialog. (2) Enter a new name for the selected adapter and enter its password (Take note of the password format). 4. 2. 2 Add Device You can add a remote Powerline Adapter to your network that is not in the displayed list. You are suggested to locate the passwords for all Powerline Adapters you wish to manage and add them to the local logical network by clicking the Add button. [. . . ] to select the downloaded files on the computer into the 19 TL-PA551 AV500+ Powerline Adapter with AC Pass Through Chapter 5 Advanced Feature: How to Use the Pair Buttons 5. 1 Pair (Secure with 128 bits-AES) The Homeplug AV standard uses 128-bit AES (Advanced Encryption Standard) to safely transmit data between powerline adapters. For the powerline adapters to communicate with each other they all need to use the same Network Membership Key (NMK). Otherwise, they cannot unscramble the encrypted data sent in the powerline network. The Pair button allows you to set up a secure powerline connection with another HomePlug AV compliant powerline devices which also support the Pair feature. 5. 2 Set Up a Secured Powerline AV Network with the Pair Button You can connect a number of devices on a powerline network, but you can only use the Pair button on two devices at a time. Create a secured Powerline network using the Pair button： Step 1. [. . . ]