User manual TOMY DIGITAL TD300

[. . . ] Under no circumstance should you place any parts of the monitor in or on a cot. For best performance we recommend that the monitor is placed no further away than 3 metres from your baby. POWER ON Make sure both the Baby and Parent Units are plugged into the mains and/or have their batteries installed (see above). As each unit activates, watch for the Sound Level Lights Display on the Parent Unit as it scrolls from left to right and right to left as the Parent and Baby Units auto-search and link to each other. [. . . ] TEMPERATURE GAUGE To check the ambient temperature of your baby's room simply press and hold the button on your Parent Unit. The Sound Sensitive Light Display shall be temporarily suspended and replaced with the ambient temperature in your baby's room. please note the temperature gauge is marked in 2°C intervals. Should the ambient temperature fall in-between intervals then the lights above and below will illuminate (e. Periodically examine product for signs of damage to electrical parts and do not use until damage has been properly repaired. Always remove batteries from the Baby Unit if using the mains adaptor for long periods of time. NIGHTLIGHT Your Baby Unit has a soft glow Nightlight that can be activated by pressing the remotely from your Parent Unit. button on your Baby Unit or · GUARANTEE We guarantee your monitor against manufacturing defects for 2 years from the date of purchase on production of a valid receipt. In the first instance of a manufacturing defect, we recommend that you return your monitor to its place of purchase. If this does not satisfactorily resolve your problem, please refer to www. To extend the Baby Unit's battery life the Nightlight will only operate for 5 minutes at a time. To switch off the Nightlight, press the button on your Baby Unit or on the Parent Unit. To use the Nightlight without monitoring, please refer to the `Independent Nightlight' section within this booklet. Once installed place the Parent Unit on charge and leave for several minutes before switching ON. The Tomy Baby Monitor is designed to help you monitor your child and is not a substitute for adult supervision. Always keep electrically operated items and their cables out of reach of babies and younger children. Under no circumstances should you place any part of your monitor in or on a cot. Ensure all wiring is positioned safely so that children cannot become entangled and that no trip hazard is created. [. . . ] I have measured the temperature of my baby's room using another device and I get a different reading than that of my monitor- why?The temperature measuring device within your Tomy monitor is designed to give you an indication of the baby's room temperature to within a small tolerance of + 1°C or - 1°C. You can use your monitor in the country it was purchased and anywhere in the EU. Although your monitor may function correctly in other countries, its operating frequency may affect (or be affected by) other devices and could be illegal. [. . . ]