User manual THRUSTMASTER CHALLENGE 2
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual THRUSTMASTER CHALLENGE 2. We hope that this THRUSTMASTER CHALLENGE 2 user guide will be useful to you.
You may also download the following manuals related to this product:
THRUSTMASTER CHALLENGE 2 (153 ko)
THRUSTMASTER CHALLENGE 2 (153 ko)
THRUSTMASTER CHALLENGE 2 (153 ko)
Manual abstract: user guide THRUSTMASTER CHALLENGE 2
Detailed instructions for use are in the User's Guide.
[. . . ] TECHNICAL FEATURES
5 digital action buttons (A, B, X, Y, Z) 4-way D-Pad or digital “C-stick” Start/Pause button Trigger click L button Trigger click R button Rumble on/off button (vibrating effects, function activated by default) Shift D-Pad/C-stick button Program button LED Integrated motor for vibrating effects 2 analog levers (gas/brakes controls or gear shift depending on the game)l Gamecube™ connector Table clamp system
D
1. Contents, designs and specifications are subject to change without notice and may vary from one country to another. [. . . ] To obtain an effect similar to the one produced by the analog C-stick on the Gamecube™ gamepad, press and hold down one of the arrows. For example, if you press and hold down the upwards arrow, the camera will move progressively upwards. To return to the D-Pad function, press the Shift D-Pad/C-stick (7) button again. USING THE PROGRAM BUTTON Overview • The function of every digital button (A, B, X, Y, Z, Trigger click L, Trigger click R) can be applied to another digital button or lever. Für
Gamecube™
US
• • •
The function of each lever can be applied to a digital button or lever. If a digital control is programmed onto an analog control, that analog control becomes digital. If an analog control is programmed onto a digital control, that digital control remains digital. The Start/Pause, Program, Rumble on/off and Shift D-Pad/C-stick buttons, the 4-way D-Pad arrows and the left and right wheel directions cannot be programmed. Press the button/axis that you wish to program elsewhere: the LED turns yellow**. Press the button/axis that you wish to program with the same function as the button/axis pressed in Step 2, above: the LED turns green, and then turns off. The button/axis selected in Step 3 now has the same function as the button/axis selected in Step 2. Para utilizar con
Gamecube™
US
* In this section, the term “axis” is applied to levers. [. . . ] To return to the default configuration Hold down the Program button together with the button which has just been assigned a new function for at least 5 seconds: the LED turns green when the default configuration has been restored. Example: If you have applied the A button’s function to the right-hand lever (as in the example above) and you would like to reset the function of the right-hand lever, hold down the Program button for at least 5 seconds. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE THRUSTMASTER CHALLENGE 2
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual THRUSTMASTER CHALLENGE 2 will begin.