User manual THOMSON WS3268N

[. . . ] This manual is designed with the corresponding illustration accompanying the texts. Load the washing machine , after sorting the clothes according to colour, fabric type and how dirty they are. [. . . ] Remember that you must not exceed the MAX level marked on the fabric softener compartment. Select the programme using the dial, after consulting the programme chart. 4) the washing process will stop before the final spin and the clothes will be left in water. You can desactivate the function, at any time it will continue with the final spin. It is unlocked by pressing the button again and holding it down approximately 3 seconds (2. Recommendations for use: As soon as the washing machine is installed you can programme a preliminary wash to check it is functioning correctly (standar no load and at 60º). ⷠNever use dry cleaning solvents, petrol or any other inflammable or explosive products in the washing water to avoid any risk of fire or explosion. To clean the outside of the washing machine, use non-abrasive products and dry thoroughly with a soft cloth. 1 The washing machine includes a troubleshooting system which detects and warns of any anomalies. This can be seen on the display, LCD or when the pilot lights on the control panel start to flash. This washing machine has been designed with environmental protection in mind. Always load the washing machine to the maximum recommended capacity for each programme: this will save water and power. [. . . ] Only use the extra rinse function for garments belonging to people with sensitive skin. Recycling domestic appliances means fewer negative consequences for health and the enviroment and saves power and natural resources. [. . . ]