User manual THOMSON WHP 465

[. . . ] To ensure maximum ventilation do not cover the device's opennings with newspapers, tablecloths, curtains, etc. No naked flame, such as lighted candles should be placed on, or close to, the device. if for exceptional reasons you use it outdoors (balcony , veranda , etc. [. . . ] Natural discharge Because of their chemical design, all rechargeable batteries suffer from a natural discharge phenomenon, meaning that they automatically lose their charge to varying degrees and so their capacity drops when they are not used. The size of this loss varies according to the rechargeable battery's type and its design, internal resistance and (particularly) the temperature. To avoid the risk of fire, explosion and injury, do not try to recharge non-rechargeable batteries. Before disposing of rechargeable batteries, ask your distributor if they can be recycled and if he collects them. If your audio source has two RCA (cinch) audio output jacks instead of a headphone jack, use the cords supplied (13 and 15) to connect your headphones to the two (red and white) RCA plugs. Switch on your audio source (television set, Hi-Fi unit, CD player, etc. Warning: If the volume is too low, the cradle switches off after 2 minutes of use. This is to comply with the current legislation on reduce the amount of radio emissions in the environment. Therefore, to ensure that this function is not accidentally triggered, we suggest that you set the television, audio amplifier or DVD/CD player headphone volume level at approximately half way (50%). Please consult your equipments user manual for details on how to set the head / earphones volume level. The cradle is activated automatically when receiving an audio signal from the source through The cradle's input socket (10) (check that the cradle is properly supplied using the adapter, as specified in step 3, page 4). The cradle has an automatic function that switches it off if the audio input jack (10) does not receive an audio signal for approximately 2 minutes. Please consult your equipments user manual for details on how to set the head / earphones volume level. The PLL function automatically locks the three channels, providing you with top-quality listening and no sound loss. When you have finished using the headphones, switch off the headphones using the On/Off button (POWER) (2) and place the audio source on standby. Note: to ensure your headphones are charged and ready for use at all times, place them on the cradle when not used. Other possibilities of use The accessories supplied with your headphones include a jack adaptor (16) for connecting the unit to a 6. You can use this Y cable to enable you to use your headphones differently. [. . . ] Check that the distance between the headphones and the cradle is within the operating range (80 metres in the open air, or several tens of metres indoors dependent on the building materials used and the charge remaining in the rechargeable batteries). When no signal is received through the cradle's AUDIO IN socket, it switches off. Switch on your audio source again and use the tuning control (4) to adjust reception. [. . . ]