User manual THOMSON TM9255

[. . . ] TM9255-EN 4/6/04 2:32 PM Page 1 EN No film output on this page TM9255-EN 4/6/04 2:32 PM Page 2 Safety Information EN Thomson Information CAUTION!This system must be opened only by qualified technicians to prevent accidents caused by the laser beam. LASER = 780 nm, P max = 5 mW Rating Information: At bottom/rear of the unit this unit comply with the existing requirements In accordance with the rating plate of the unit, this unit complies with current standards concerning electrical safety and electromagnetic compatibility. Please respect the environment Before throwing any batteries away, consult your distributor who may be able to take them back for specific recycling. [. . . ] You can record from 32 kbps to 320kbps. Searching up for station 4. Press PRESET or to scroll up and down the preset location and select the one you wish to delete. 01 02 03 FM FM MW 87. 5MHz 100. 5MHz 603kHz When station is found, it will be stored into Preset. FM 88. 00 MHz Preset 1 Entering CD Mode 5. Press ENTER to delete preset station from the selected memory location. Auto Preset will stop once all 30 preset stations are full or when the frequency band ends. In Tuner mode, press FUNCTION/STANDBY twice to enter CD mode. Auto Preset Completed Wait while the CD is being read. Reading Disc Please Wait. . . 01 02 03 FM 87. 5MHz MW 603kHz ------------------------- Inserting Disc 1. Close the compartment door and push down on the door until it locks in place. on the unit to open the CD com- Note: DO NOT press any key until auto-preset search is complete. Note: If the disc has an error or if there is no disc on the disc tray, the system will take a long time for reading. If there is no disc on the disc tray, NO DISC will be displayed Note: The unit will automatically power off if no function is initiated for more than 30 minutes. 11 12 TM9255-EN 4/6/04 2:33 PM Page 16 mp3 and CD Player EN Playing CD Discs Press PLAY/PAUSE to start playback. mp3 and CD Player Repeat 1. Press MODE to view the CD mode menu. Random Playback Enable mix play to randomly play tracks on the disc. System Setting. 1 Intro Mix All On On Off Off Off Enable Random Playback from Playmode menu 1. Note: When the unit is in pause mode for more then 5 minutes, the unit will automatically enter Stop mode. 2. In CD mode menu, press PRESET or move up or down the menu until the cursor is pointing to the Playmode. . . OFF - Turn off the repeat feature. 1 Intro Mix All On On Off Off Off Playmode. . . Activating Intro will play the first 10 seconds of each track on the disc. will show on the dis- Skip and Search Tracks · Press TUNE to go back to the previous track. Press and hold to search forward in a song. 1 Stop Playback Press STOP to end playback. : Tip: To listen to CD through headphones, insert your headphones into the PHONES jack on the back of the player. All On On Off Off Off 4. Press PRESET or to move up or down the menu until the cursor is pointing to the playback mode option you want. Press ENTER to select between Intro On and Intro Off. 00:05 TRACK 01 Intro Tip: When in Intro mode playback, press PLAY/PAUSE to disable Intro and continue with normal play. 13 14 TM9255-EN 4/6/04 2:33 PM Page 18 mp3 and CD Playback EN Program Playlist 1. Press TUNE or to select track number for the next available program location. Delete Song from Playlist 1. Follow steps 1 to 5 under Program Playlist and select Erase Song in step 4. View Song Erase Song Erase Playlist EN Playmode. . . In CD mode menu, press PRESET or move up or down the menu until the cursor is pointing to Playlist. . . to 01 02 03 TRK TRK TRK (01) --- Activate Program Playback 1. [. . . ] Any repairs or internal adjustments should be made only by a trained technician. ·Do not use your System immediately after transporting it from a cold place to a warm place, as condensation may cause the system to malfunction. · Keep your unit away from humid areas and abnormally hot places. If any liquid enters the player cabinet, take the player to a trained technician for inspection. [. . . ]