User manual THOMSON ROCZ407

[. . . ] Install 4 AAA alkaline batteries (sold separately) in the remote's battery compartment, and use a dime to set its dial to the same Housecode as your camera's power supply. Single Camera Operation Press a left or right BLUE button at the top of the ROCZ407 Remote to "Pan" the camera left or right. Press a BLUE up or down button to "Tilt" the camera up or down. [. . . ] Press a BLUE up or down button to "Tilt" the camera up or down. Buttons P1 thru P4 are used to store 4 position settings for the camera. To store the first position for the camera, press the BLUE buttons to scan to the position you want. To store the second position for the camera, press the BLUE buttons to scan to the position you want. To store the third position for the camera, press the BLUE buttons to scan to the position you want. Refer to the owner's manual for Ninja Pan `n Tilt System for more details. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. ANY CHANGES MADE TO THE UNITS WILL VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. LIMITED1-YEARWARRANTY C1 CAMERA C2 C3 C4 P1 P2 POSITION Centers the camera. . O M . K P3 Center P4 Sweep . A. C . I. G SCAN Normal Program Set to the same letter as the Transceiver and camera power supplies. [. . . ] LIMITED1-YEARWARRANTY C1 CAMERA C2 C3 C4 P1 P2 POSITION Centers the camera. . O M . K P3 Center P4 Sweep . A. C . I. G SCAN Normal Program Set to the same letter as the Transceiver and camera power supplies. [. . . ]