User manual THOMSON M3673GCT

[. . . ] M 3673 GC - M 3673 GCT COLOUR TELEVISION MAINS CONNECTION AND REMOTE BATTERIES MAINS CONNECTION The TV is suitable for use on a. c. If the mains sockets are not compatible or if for any reason the plug is removed please follow these directions : The moulded plug cannot be rewired and if removed must be disposed of safely. DO NOT under any circumstances plug the severed plug into any mains socket as this could result in electric shock. IMPORTANT : If the plug is removed rewire new plug as follows : The wires in the mains plug are coloured in accordance with the following code : BLUE - NEUTRAL BROWN - LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows : BLUE wire to the terminal coded N (Neutral) or coloured black. [. . . ] The television will switch on to the selected channel at the time programmed. It will automatically switch off after five minutes if no key is pressed on the remote control or on the television keypad. If the set is switched on before the alarm function is activated, it will not switch to the programme selected for the alarm at the programmed time. It is possible to programme both the automatic switching off (SLEEP TIMER) and switching on (ALARM). In this case, the automatic switching on time must be programmed to take place after the switching off time. - 11 - MANUAL CHANNEL SETTING MENU MENU Press briefly to call up the main menu. MENU Press repeatedly to select the Program. : X X Name : -- -- -- -- UK + While the television is in any AV mode, (audiovisual), PROGRAM. CHANNEL SEARCH MENU PROGRAM. If you do not know the channel numbers STOP FUNC. Start the search by pressing : -- : backward channel search. + : Forward channel search. The cursor will move and the channel numbers are displayed on the CH line when received via the aerial or on the CC line for cable network. If the picture, corresponds to the station required, go to the line, otherwise continue the search. If you already know the channel numbers MENU 0 AV / 6 Select the CH line for TV channels (aerial) or CC for cable networks. If your VCR is connected by RF cable and if you do not find the VCR output through Autoprogramming, set channel to 38 or 60 (see User Manual of your VCR) and use fine tune up and down until the VCR output is found. Once found, then memorise the frequency against your chosen programme number (eg9). FINE TUNING (OPTIONAL) Fine tune can be used to remove interference if necessary. : X X Name : -- -- -- -- If you have a decoder to receive a scrambled channel, the TV set goes into AV when this channel is being received. In this case, disconnect the SCART socket from your decoder and call up the PROGRAM. Select the line (Fine Tuning), reconnect the SCART socket and adjust the fine tuning if necessary. - 12 - MENU 3. : X X Name : -- -- -- -- Memo -- /+ Enter an unused programme number using the remote control. MENU 4. VT PROG. PROG. Hold down (PROG +) : the characters are Name : -- -- -- -- Memo displayed in ascending order. Hold down (PROG --): the characters are displayed in descending order. Program. VT When the character you are looking for is displayed, move on to the next ( + ), or preceding dash ( -- ). To insert a space, use the empty character (between ß and A). MENU 5 . S T O R I N G I N M E M O RY Press briefly to select the Memo line. CH X X CC PROGRAM. FUNC. : X X Name : -- -- -- -- Memo -- /+ Search for and store all channels. TV Press briefly to remove the menu from the screen. CHILD LOCK You can prevent the use of your television set without the remote control. - After switching off the TV set by holding down the Stand-By button on the remote control for more than 4 seconds. [. . . ] Don't obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Don't listen to headphones at high volume, as such use can permanently damage your hearing. Don't use makeshift stands and NEVER fix legs with wood screws­to ensure complete safety always fit the manufacturer's approved stand or legs, with the fixings provided, according to the instructions. Don't allow electrical equipment to be exposed to rain or moisture. [. . . ]