User manual THOMSON LCD

[. . . ] . 8 Switching on and off Volume Displaying status information Accessing channels Accessing AV programmes EN TV DVD Setting the time ­ List of programmes . . 23 1 TV_DVD_LCD_en 17/06/02 11:45 Page 2 Precautions Precautions concerning the installation and care of your LCD TV/DVD. · Safety The TV/DVD's components are sensitive to heat. The maximum ambient temperature should not exceed 35° Celsius. Moisture in rooms where the set is installed should not exceed 85% humidity. [. . . ] Link Mode The display of the last line differs according to the type of teletext received. If however the reception conditions do not allow such automatic detection, you can manually carry out this selection. Using the / keys, display FORCE AUTO in the grey window at the bottom left of the page. Then press OK to select FORCE FASTEXT or FORCE TOP depending on the case. Direct access: the yellow and blue buttons allow direct access to the pages whose numbers are displayed in yellow and blue at the bottom of the screen. Fastext: Fastext contains 4 colour subject headings which appear at the bottom of the screen. Select the desired page by the colour buttons on remote control. After you have made your choice, additional subject headings may appear. TOPtext: TOP text contains pages arranged in subject headings with articles. Press blue button to select the heading displayed at the bottom of the page. The following heading is then displayed in blue at the bottom of the page. Press yellow button to select the article displayed at the bottom of the page. The following article is then displayed in blue at the bottom of the page. Additional functions Some channels transmit via teletext subtitles of their programmes, as well as the latest newsletters. The numbers of appropriate pages are to be found in the Teletext table of contents. Once found, the subtitles or a newsletter are overlaid onto the picture. The reference line will vanish in seconds. To leave Teletext, press exit. 13 TV_DVD_LCD_en 17/06/02 11:45 Page 14 DVD menus This page shows you the different menus available in DVD mode. If the TV/DVD set is in stand-by mode, switch it on by pressing the PLAY button of the remote control. If the TV/DVD set is in TV mode, press the tv/dvd button of the remote control or keyboard. The main menu provides access to all the other menus described in the following pages. Main menu This menu allows you to define the player's settings (languages for menus and disc, sound outputs, display modes), to choose the playback mode and to lock the player. If you have not loaded any disc, the menu appears automatically. / Press return to come back to the previous menu. Disc Contents menu To access this menu, press the PLAY button to put the disc in playback, then press the title button. This menu is only available if the disc contains several titles. Press once more the title button to close the menu. Info menu The info menu allows you, during playback, to display information about the disc and to access some special play functions. The info menu is deactivated when the disc is stopped. To access them, the player must be in play mode. Press on the remote control info (yellow) button to display all the info. Press a direct access key of the remote control ( , , ) to access the corresponding information. Disc options menu To access this menu, press the PLAY button to play the disc, then press the disc menu button. The "options" menu of the disc is only available if the disc contains a menu. Press once more on the disc menu button to close the menu. Appearance and content of the menus may vary according to the discs (follow the instructions on the screen). TV Menu You may access certain TV part menus while remaining in DVD mode. Press the red buton of the remote control to access the sound and picture preset menu of the TV part. By pressing the tv menu button of the remote control, you may access the picture and sound menus of the TV part. Screen saver:Your LCD TV/DVD is equipped with a screen saver. This screen protection device starts up automatically: - if a menu is displayed for more than 5 minutes without any key on the remote control or keypad being pressed. [. . . ] Press once av button on your remote control to select AV1 and display images from the connected equipment. For some equipment conected to the AV1 SCART socket, this selection is done automatically. AV2 AUDIO AV2 Audio / Video CINCH sockets (input) at the back of the TV/DVD. These can be mainly used to connect a camcorder (VHS or 8 mm). Press twice av button on your remote control to select AV2 and display images from the connected equipment. When you switch off the connected device, the TV/DVD set will remain on programme AV2. To return to a channel, enter its number on the remote control. L. R. VIDEO EN TV DVD Audio L. [. . . ]