User manual THOMSON ETC210

[. . . ] ETC210_en 2/05/03 17:51 Page 1 Precautions Safety The television's components are sensitive to heat. The maximum ambient temperature should not exceed 35° Celsius. Leave sufficient space around it to allow adequate ventilation. Damp in rooms where the set is installed should not exceed 85% humidity. If you have to use the television outdoors, do not expose it to water from rain or splashing. Therefore be careful not to place any object containing a liquid (vase, glass, bottle, . . . ) on or near your appliance. [. . . ] number option in the Preferences menu, the channel number will be displayed permanently (see. Accessing programmes: - Using the numeric buttons: for programmes 1 to 9, press the corresponding button. For two-digit programmes, first press the 0/-- button, then the programme number (e. g. - Using the PR +/PR - buttons: scan through the programmes. You cannot access AV programmes but these are accessible using the PR+/PR- buttons on the TV set. Zoom: on 16/9 models you are able to enlarge pictures broadcast in 4/3 or letterbox format (black strips at the top and bottom of the screen) to fit the picture to your screen. First press EXIT if a menu is on the screen and select the magnification required with the buttons: ZOOM 0: 4/3 picture (black strips at the sides). ZOOM 1: for pictures in letterbox centred on the screen (without sub-titles). If Auto zoom function is enable in Preferences menu, your choice will be valid till you change channel. EN Accessing AV programmes Press the AV button to display the last selected AV programme, press again to access the other AV programmes. You can also access AV programmes using the list of programmes (see page 11). More info Child lock You can disable the TV buttons so that your children cannot switch the television on without your permission. The TV set can then only be switched on using the remote control. This function is activated: · after the sleep timer has been set. · if you put the TV into Standby mode by pressing the standby button B on the remote control for 4 seconds. When the television set is in standby and locked, the indicator on the front panel flashes red. Sound and Picture preferences Display the menu with the red button, select the desired line and adjust to your liking 10 ETC210_en 2/05/03 17:51 Page 11 Setting the time ­ List of programmes The information on this page explains how to use the TIME menu functions (Setting the time, Sleep timer, Wake-up), as well as those for the LIST OF PROGRAMMES menu. Time OVERVIEW Exit Program Info Sound Picture > Time Preferences Installation Display the OVERVIEW menu using the MENU button and select the Time option. · Sleep timer: set an automatic shut-off time (0 to 4 hours, with 5 minute steps) using the buttons. When the sleep timer is on, a message appears one minute before the TV set goes into standby mode. Press any button on the keyboard or on the remote control to cancel standby mode. Wake-up timer: press OK to check the box in order to enable this function and display the menu options. Programme number: use the buttons or numeric buttons (2digits) to enter the number of the programme you want to wake you up. Put the TV set into standby mode using the B button on the remote control. The indicator on the front panel starts flashing slowly. The TV set will automatically switch on at the programmed time and for 1 hour duration if you do not interrupt it by using the remote control. Excepted volume buttons, keyboard is locked until you change channel. EN TIME Return Sleep timer Current time Wake-up timer Wake-up time Programme number Daily < I > 00:00 11:28 þ 07:07 08 EURO þ List of programmes LIST Exit 01 02 03 04 05 06 07 08 09 TF1 FR2 FR3 C+ FR5 M6 Press the LIST (green) button on the remote control to display the LIST of programmes. It has a maximum of 11 pages and shows the name and the number of each programme. The last page lists units connected to the AV sockets. TV > It opens on the page where the programme you are currently watching is listed. To watch one of the programmes on the displayed page, use the PR + / PR - or buttons and press OK. [. . . ] To do this, select the last line of the menu with the or button and display Clear with the Then use the with OK. or button to put the cursor on the programme to be deleted and confirm buttons. Memo lets you enable (or disable) the display of a message at the start of a programme on the list. To do this, select the last line on the menu with the or button and display Memo with the button. Then use the or button to put the cursor on the programme that you want to be alertedabout and confirm with OK. You can then watch another channel but will be alerted by a message when the selected programme begins. [. . . ]