User manual THOMSON DTH 8657 QUICK START GUIDE

[. . . ] If no menu is displayed after a moment or two, select the AV socket on the TV set that you have connected your recorder to. [. . . ] â· AUTO, 576P, 720P, 1080I for an HDMI connection (select AUTO if you do not know your television set's resolution). â· 1H YUV for a Y-Pr-PB Component connection (In this case, remember to connect the rca/cinch AUDIO L and R sockets for the sound). Note 1:When you press the ZOOM/VIDEO OUT button, wait a few seconds to let the television set or the monitor detect the video signal. Note 2:The settings above may be applied the first time you use the recorder because the first screen displayed by the recorder is a screen to select the menu language. If you connect a television set via the HDMI or Y-Pr-Pb, sockets you will not then see this screen. Nevertheless, carry out the setting in step 3 above above 15 seconds after you switch the recorder on. To set the first time you switch the recorder on, make sure you are in menu mode (in STOP or with the MENU key) as the video signal cannot be selected while you are playing a disc or watching a TV channel. The codes given are generally those which are recognised by the receivers of the brands quoted. [. . . ] Following steps: Now follow all of the indications and instructions that appear on the screen in the various windows. [. . . ]