User manual THOMSON DLP-ITC251

[. . . ] itc251-en 2/02/06 11:42 Page 1 Contents Chapter1: Getting started Important information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Specific precautions for DLPTM TV sets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 What is DLPTM technology?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Switching your TV set on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Replacing the lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Moving the TV set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Using the remote control for other equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Programming the remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Programming the volume control function . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 The Learning feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 EN Chapter 2: Channel set-up Initial set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Manual channel set-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Chapter 3: General operation Switching the TV set on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Displaying status information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Accessing channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Accessing AV programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 List of programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Freezing a picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 This manual applies to several TV set models. The model number of your TV set is on a label at the back of the set and on the cover of this manual. In the interest of improving the quality of our products, we reserve the right to modify their features. The information in this manual is, therefore, subject to change and does not represent any kind of contract. This symbol means that your inoperative electronic appliance must be collected separately and not mixed with the household waste. The European Union has a implemented a specific collection and recycling system for which producers' are responsible. [. . . ] Enter the number of the reception channel or use the buttons to find the channels. When a channel has been found the picture is displayed. If the picture is not clear you can adjust the setting. You do this by selecting the Fine tuning option and adjusting it with the buttons. Then select the Store on programme option and enter the number to be assigned to this channel using the numeric buttons (for instance, for BBC1 type 01). Press OK. Important: Whenever you change a value in the Manual install menu, the Store on programme option starts flashing. To confirm your change you need to select the Store on programme option and press OK. If you do not confirm the change it will be cancelled when you change channels or put the TV set in standby. Repeat this procedure to find other channels. Notes: - For cable networks, to search for missing channels, select Other instead of a country, then select Auto update in the Installation menu. - If you wish to go through the whole initial set-up process, put the TV in standby mode, then hold + buttons on the television until the menu displays. - Subsequent set-ups: - The Auto update function allows you to set up channels just launched or any channels that are missing or wrongly set up. - The Auto installation function is used for setting up channels after the initial set-up (e. g. To set up a new channel, it is better to use Auto update or Manual installation. 9 itc251-en 2/02/06 11:42 Page 10 Chapter 3 General operation Switching the TV set on and off To switch the TV set on, press the A button located on the side of the set. The TV set takes up to 40 seconds to come on. If the indicator on the front is red, the set is in standby mode. You can then: - press the or any numeric button on the remote control, - press the TV, OK or PR+/PR- buttons to switch the television on at the last channel or AV programme you were watching, EN - press the AV button to switch the television on at the last AV programme you were watching. To put the TV set in standby mode, press the button on the remote control. When the set is in standby mode, the indicator on the front is red. The TV set remains powered up, but with low energy consumption. To switch off the TV set, press the on/off button on the side of the set. Note: The fan continues to run for about another two minutes after the TV set has been switched to standby mode. Volume Volume control: use the +/- buttons on the front of the TV set or press the relevant buttons on the remote control to increase or decrease the volume. Press this button again or the + button to restore it. Displaying status information In TV mode, press the yellow button (INFO) on the remote control to display the number and name of the channel you are watching, the time, the type of sound, and the zoom or format. When you switch on the television or change channels, the number and name of the channel are displayed. Accessing channels Using the numeric buttons: - for channels 1 to 9, press the corresponding button; - for channels 10 to 99, press the 0 button to display "--", then enter the two digits. AV programmes are not included in the cycle unless you use the buttons on the front of the TV set. To access the channel or AV programme previously being watched, press the RETURN button Accessing AV programmes Press the AV button to display the last selected audio-visual programme and scan through the other audio-visual programmes. Av selection loop: AV1, AV2, AV3, COMP, HDMI, VGA. 10 itc251-en 2/02/06 11:42 Page 11 General operation Zoom In TV mode, you have the option of changing the display format and using the zoom function via the buttons. The available formats and zoom functions are: 4/3 format - picture in centred 4:3 format Zoom 14/9 - picture in centred letterbox 14:9 format Zoom 16/9 - picture in centred letterbox 16:9 format Zoom 16/9 /- picture in 16:9 format with subtitles Cinerama - picture in widescreen 4:3 format 16/9 format - picture in widescreen 16:9 format In Zoom 14/9, Zoom 16/9, and Zoom 16/9 / modes, you can temporarily shift the picture up and down using the buttons. For HDTV, Progressive Scan, HDMI, and PC (VGA) sources, some of these modes are not available. EN List of programmes List 01 02 03 04 05 06 07 08 09 ARD ZDF SAT1 ESPORT RTL RTL2 VOX SW3 WDR Press the LIST (green) button on the remote control to display the LIST of programmes. It has 11 pages and shows the name and the number of each programme. The last page lists units connected to the AV sockets. The list appears on the page featuring the channel or AV programme which you are currently watching. The channel or AV programme you are watching is indicated by a symbol. To watch one of the programmes on the displayed page, use the PR+/PR- or buttons and press OK. You can also enter the last digit of the programme number (for example, 5 for 25). The selected programme is shown. [. . . ] To display a page, enter its 3-digit number or use the PR+/PRbuttons. The page appears after a few moments. The entered number appears: -red if the page number has not yet been found, -white if the page has been found, -green when a sub-page has also been found for this page, -yellow when the page exists but has not been found yet. If the current page includes subpages, the page number is displayed in green. In this mode, pressing the buttons will allow you to step through all the available subpages. You can select a specific subpage number by pressing 0 to enter subpage direct access mode. The display will look like this: 120 ----. [. . . ]