User manual THOMSON CS66

[. . . ] Safety Information For UK Only CONNECT THE MAIN LEAD INTO A MAINS POWER SOCKET POWER SUPPLY 230V. If the mains socket are not compatible or if for any reason the plug is removed please follow the directions below. The moulded plug cannot be rewired and if removed must be disposed of safely. DO NOT under any circumstances plug the severed plug into any mains socket as this could result in electric shock. [. . . ] Press ADJUST (or Adj Time on the remote control) to shift to the minute digits. Press ADJUST (or Adj Time on the remote control) to confirm the setting. Press ADJUST (or Adj Alarm on the remote control) to move to the minute digits. Press ADJUST (or Adj Alarm on the remote control) to move to source selection. Corresponding source icon shows on the display (Buzz as "SC:bU") 7. Press ADJUST (or Adj Alarm on the remote control) to move to volume setting. Press ADJUST (or Adj Alarm on the remote control) to confirm settings. · Timer will be activated automatically after settings are finished. Note: Sleep is automatically deactivated when the unit is turned off. Top View OPEN ­ Press to open the CD compartment door. ALARM - Press once to check alarm time, press and hold to switch on or off alarm function. Press and hold to change display background colours. 10cm Special Features Preset Equalizer Curves Press Preset EQ on the remote control to toggle among FLAT, JAZZ, ROCK, POP and CLASSICAL. The selection is highlighted on the display. Installing Batteries The remote control must be inserted with 2 "AAA" or "LR03" batteries prior use. Changing Display Brightness Press and hold DISPLAY on the top of the unit to change the brightness level of the display. Side view 10cm AC & DC Power Input Make sure you have connected all cables before plug in. For AC power, connect the power plug to an AC power outlet (230V~50Hz). Setting Timer 1. Press ALARM and ADJUST together (or Adj Alarm on the remote control) to enter timer setting mode. Press or to set the hour. Changing Display Colors Press and hold ADJUST on the top of the unit to change the display colors. 5cm You can also power the unit with a 12V DC adapter (not included). Note: DC power input will be disconnected whenever AC power is connected. Do not connect both DC and AC power at the same time. X-Bass Press X-Bass on the remote control to turn on/ off the x-bass feature. The X-Bass icon is displayed. Quick Start Refer to the following for basic playback and radio listening. For detailed operations and more advanced features, please refer to relevant sections. CD Playback Listening to Radio 1. Press BAND (or Band·APP on the remote control) to select radio band. · Wait while the unit reads and counts the total number of songs on the disc. · If the CD compartment is not loaded with a CD or the CD is unreadable, "disc" flashes on the display. · If the song is a mp3 or WMA file, the mp3 or WMA icon lights on the display. [. . . ] If the lens becomes dirty, clean it with a soft brush, or use an air blower brush designed for camera lenses. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. The ventilation should not be impeded by covering the ventilation opening with items, such as newspaper, table-cloths, curtains, etc. No naked flame sources, such as lighted candles, should be placed on the apparatus. [. . . ]