User manual THOMSON CS104

[. . . ] Safety Information EN UK Plug Information CONNECT THE MAIN LEAD INTO A MAINS POWER SOCKET POWER SUPPLY 230V. If the mains socket are not compatible or if for any reason the plug is removed please follow the directions below. The moulded plug cannot be rewired and if removed must be disposed of safely. DO NOT under any circumstances plug the severed plug into any mains socket as this could result in electric shock. [. . . ] Close the CD compartment door. Notes on CD-R/RW · Do not affix any type of labels to either side (recordable or labeled side) of a CD-R/RW disc as this may result in the unit malfunctioning. · To avoid damages to the CD-R/RW disc, do not open the disc compartment door while the disc is being read. · Playback capability for CD-RW discs may vary due to variations in the quality of the CD-RW disc and the recorder used to create the disc. Playback · Press PLAY/PAUSE to begin or pause playback. · Press STOP to stop play. Tips: If the CD compartment is not loaded with a CD or the CD is unreadable, the message "NO DISC will be shown. NO DISC" Note: Be sure to remove all discs from the disc compartment before moving or transporting the unit! 6 CS104 EN 9 3/8/04, 1:46 PM CD Player EN Skipping Tracks Press SKIP BACKWARD or SKIP FORWARD to skip to the previous or next track on the disc. Setting Up a CD Program Tips: Searching Through a CD Press and hold SKIP BACKWARD or SKIP FORWARD to search through a CD while it is playing. A maximum of 20 tracks can be stored into memory. Random Playback Press to turn on/off the playing of tracks in random order. (Remote Only) Sampling Tracks Intro Play lets you enjoy the CD tracks for 10 seconds. Press PROG·SET·CLEAR after the CD has been loaded into the system. Press SKIP BACKWARD or SKIP FORWARD to select a track to be stored into memory location 1. Press PROG·SET·CLEAR to confirm your selection and store that track into memory. icon lights on the display. Playing a Program List While in PROGRAM mode, press PLAY/PAUSE . When the unit is playing the program, "PROG" icon will be displayed. Repeat · Press REPEAT on the remote control once to repeat all tracks. · Press again to play a particular track repeatedly, at the same time, REPEAT 1 is displayed. · Press a third time to de-select the function. Deleting Program List While in PROGRAM mode, press and hold STOP for 3 seconds. The system displays the message CLEAR. 7 CS104 EN 10 3/8/04, 1:46 PM Radio Selecting Tuner Band · Press TUNER/BAND·APP on the main unit or TUNER on the remote control to select radio mode. · Select a radio band by pressing TUNER/ BAND·APP on the main unit or BAND/APP on the remote control: FM ­ Frequency Modulation (87. 5 ­ 108 MHz) MW ­ Medium Wave (522 ­ 1620 KHz) LW ­ Long Wave (150 ­ 283 KHz) 3. Press PRESET - or + to select memory location (up to 30 memory locations). When you are selecting the preset location, the preset station number is flashing. Press PROG·SET·CLEAR to confirm the setting. EN Auto Preset Programming Press and hold TUNER/BAND·APP on the main unit or BAND·APP on the remote control to scan stations in selected band. Beware of your preset channels being erased accidentally because the scanning and storing process is automatic upon pressing the button. Press any button to stop scanning. Searching for a Station · Press TUNING - or + on the main unit or SKIP BACKWARD or SKIP FORWARD on the remote control to search for a radio station. · To search automatically, press and hold TUNING - or + on the main unit or SKIP BACKWARD or SKIP FORWARD on the remote control for 1 second. Listening to the Preset Station 1. Press PRESET + / - repeatedly to locate your desired memory location. Presetting a Station Suppressing Stereo Signal Tips: A maximum of 30 stations can be stored. [. . . ] Also, demagnetize the head by playing a demagnetizing cassette (available through an audio equipment store). To protect recordings on one or both sides of a tape, remove the corresponding tab. If you later want to record on the tape, affix a piece of adhesive tape over the hole. CD Lens Care When your CD lens gets dirty it can also cause the system to output poor sound quality. To clean the lens you will need to purchase a CD lens cleaner which can maintain the output sound quality of your system. [. . . ]