User manual THOMSON CB1160HDD

[. . . ] CB1160HDD EN HDD & DVD / VIDEO CASSETTE RECORDER E3TF0ED_EN. book Page 2 Wednesday, March 17, 2010 11:20 AM . Introduction Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The symbol for CLASS II (Double Insulation) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). The important note is located on the rear of the cabinet. Laser Safety This unit employs a laser. [. . . ] Preparing for dubbing (DVD to HDD): • Insert a disc to be dubbed. VCR to HDD / DVD You can copy the contents of a videotape to HDD or DVD disc. Limitation: • If a copy control signal is detected during dubbing, the dubbing will be stopped. • Copy-once programmes which are recorded directly from the TV can be dubbed to the HDD and CPRM compatible VR mode DVD-RW. • Copy-once programmes which are copied from the HDD / DVD to a videotape cannot be dubbed further from the videotape to the HDD / DVD. Limitation (VCR to HDD): • With VCR to HDD dubbing, the unit recognise the HDD’s remaining time as the dubbing duration. Limitation (VCR to DVD): • You cannot dub to the finalised video mode DVDs. Preparing for dubbing (VCR to HDD): • Make sure there is enough space on the HDD. HDD / DVD to VCR You can copy the contents of the HDD / DVD to a videotape. Limitation: • If a copy control signal is detected during dubbing, the dubbing will be stopped. Limitation (DVD to VCR): • The contents of DVDs made on this unit can be dubbed. Preparing for dubbing: • Insert a recordable videotape with a record tab intact. • Make sure that the videotape has enough space to record the contents. Preparing for dubbing (DVD to VCR): • Insert a disc to be dubbed. One Touch Dubbing Video VR VCR DVD-RW DVD-RW DVD-R You can start dubbing right away with just one touch. HDD One Touch Dubbing between HDD and DVD If you want to record a title in the HDD, press [HDD] first. If you want to record a title in a disc, press [DVD] first. During playback of the title you want to dub, press [DUBBING]. If you are playing back an HDD, HDD to DVD dubbing will start right away. If you are playing back a DVD, DVD to HDD dubbing will start right away. (HDD to DVD only) During playback of the title you want to dub, press [DUBBING HDD M DVD] on the front panel. Press [STOP C] for 2 seconds on the remote control. Note • When dubbing from DVD to HDD, only One Touch Dubbing will be available for finalised DVD-R or video mode DVD-RW. • The dubbing will start from the beginning of the title being played back. • If the title was in the resume stop mode, the dubbing will start from the beginning to the end of the resume stopped title. • When dubbing from HDD to DVD or VR mode DVD-RW to HDD, recording speed will automatically be set to “High” whenever the conditions are met. (See page 41. ) • If the high speed dubbing is not available, the title will be dubbed in normal speed with the recording speed of the title. [. . . ] If this does not solve the problem, use other type of compatible USB device. • Insert a DVD-video with region codes 2 or ALL. • Check the “Parental Lock” setting. (See page 30. ) • Insert a recordable disc, and ensure the disc status satisfies the recording requirements. Recording Error This disc is protected and not recordable. • Insert a ver. [. . . ]