User manual THOMSON 32LB125

[. . . ] IMPORTANT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. [. . . ] set option and choose the character set that will be used for Teletext on this channel using the / ÿ buttons. The following character sets are available: 1 : Western Europe 2 : Eastern Europe 3 : Turkish and Greek 4 : Russian and Bulgarian 5 : Arabic 6 : Farsi The character set selected determines how characters are displayed on Teletext screens. 6. Select the Store on programme option to assign a number to the channel. Important: As soon as you change a setting in the MANUAL INSTALLATION menu, the channel number starts flashing under the Store on programme option . To confirm your change you must select the Store on programme option and press OK. If you do not confirm the chang, it will be cancelled when you change channel or put the television into standby mode. Repeat this procedure (2 to 6) to find other channels. Automatic update: Auto update allows you to set up channels just launched or any channels that are missing or wrongly set up. You can access Automatic update menu by selecting the line inside the INSTALLATION menu. Return: return to the INSTALLATION menu. Standard: Select the relevant standard for your country using the / ÿ buttons. Note: the following standards are available to choose from: UK for the UK and Ireland, FR for France and Luxembourg, DK for Eastern Europe , the Middle East and Asia, EURO for Western Europe, Australia and New Zealand. Start: Press OK to start the auto update function The Frequency is incrementing during the progress of the searching. found" is incremented each time when a PR, which is not already installed, is found. When the highest frequency is reached, the auto update fuction will stop. Or if you press EXIT button, you will also stop the auto update fuction. 13 5. OPERATION General operation Switching the TV set on and off To switch the TV set on, press the button located on the right side of the set. Standby mode Press the button on the screen right side of TV or on the remote control. When the TV set is in standby mode, the indicator on the front is red. Quitting standby mode - Press the or any numeric button on the remote control, - press the PR+/PR- buttons to switch on the television at the last channel or AV programme you were watching, - press the AV button to switch the television on at the last AV programme you were watching. Volume Volume control: use the VOL + / - buttons on the right side of the TV set or press the same buttons on the remote control to increase or decrease the volume. Press this button again or the VOL+ button to Displaying status information In TV mode, press the yellow button (INFO) on the remote control to display the number and name of the channel you are watching, the type of sound, the zoom or format type, sound mute status and the sleep timer status (if active). TV lock message is displayed if the function is activated under the PREFERENCES menu. When you switch on the television or change channels, the number and name of the channel are displayed if you entered its name under the ORGANISER menu. In PC and PIC(see page 21) modes, press the yellow button (INFO) on the remote control to display the Resolution , Vertical and Horizontal frequency. Accessing channels Using the numeric buttons: - for channels 1 to 9, press the corresponding button. - for channels 10 to 99, press the 0 button to display "--", then enter the two digits. [. . . ] An adapter is required to use the PC cable (D-sub 15P) to connect a Macintosh computer to the set. There is no need to use an adapter for computers with DOS/V compatible D-sub 15P terminals. Do not set the horizontal and vertical scanning frequencies for PC signals, which are above or below the specified frequency range. For more information about external device connections, see the manuals of your external devices. 26 TROUBLE SHOOTING Before you call for service, determine the symptoms and make a few simple checks as shown below. TV set: SYMPTOMS Power does not turn ON There is no picture or sound l l l l l POSSIBLE CAUSES Ensure whether the power plug is securely inserted into the receptacle. [. . . ]