User manual THOMSON 14CB25CT

[. . . ] The ventilation should no be impedes by covening the ventilation openings with item, such as newspapers, table-cloths, curtains, etc. No naked flame sources, such as lighted candies, should be placed on the apparatus. USE - If your appliance, or a cassette, has been stored in a very cold atmosphere for a certain amount of time (transported during winter for example), wait approximately 2 hours before using your video recorder. the openings located on the top and the bottom are for ventilation purposes. [. . . ] With W/V, select the line RECEPTION and choose aerial or cable with C/B (CABLE for cable TV channels, AERIAL for the channels received via your roof aerial). IF THE PICTURE QUALITY IS POOR, use the Fine tuning buttons (W, C/B then W). VIDEOPLUS+ code (If included) OPTION: These codes are stored automatically when programming the first time VIDEOPLUS+ CODE (channel ID) Check these codes to make sure that your Videoplus+-programmed recording is successful. most TV magazines contain a list of Videoplus+ numbers attributed to the satellite and terrestrial channels. If a Videoplus+ programming on a channel has not worked properly (wrong channel, wrong times), check and correct the Videoplus+ number. If the channel is scrambled, set the cursor on DECODER (W) and tick off the box by pressing the OK key, otherwise continue with the next step. se il canale è in codice , posizionatevi su DECODIFICATORE (W) e selezionate la casella col tasto OK , altrimenti passate al punto seguente. Set the cursor to STORE ON PR and assign a number to the channel with key C/B. If you want to continue searching for other TV channels, repeat step 4-9. Tape ejection : To eject a tape, press on button STOP/EJECT on the front of your combined TV-VCR unit. Watching the TV channels installed in your VCR : Press the digit (0-9) or PR. Use the volume a +/- buttons to increase or decrease the sound volume. To watch a TV channel or a programme as it is being recorded : press the MONITOR key. Press the AV key on the remote control to select the unit connected to socket AV1 or AV2. You can only change the programme number or select a set connected on the AV1 or AV2 socket. Enter the time that the current programme ends using the numerical buttons. You can programme a recording using the ShowView codes in your TV listings magazine or using the manual programming procedure, if you do not know the codes. The first time you programme a channel, the Combi TV-Video asks you to enter the channel number (pr -). Whilst recording, you can only display other channels if your model is equipped with 2 tuners. With the MENU key, call up the SUMMARY menu and with v/w, select the line Record timer Validate with OK. Press digit buttons (0-9) to timer record TV programmes, or press AV button to timer record AV programme. Note : Make sure the Start time entered does not overlap on the time zone of other timer recordings. [. . . ] AUTO REPEAT Display the SUMMARY menu by pressing MENU then select the AUTO REPEAT command using V/W. Enter the 6 figures which correspond to the required position (if this is before zero, press the - button). NTSC STANDARD CASSETTE : NTSC is the television standard used in the USA, Japan and other countries. VPS/PDC SYSTEM Some programmes broadcast on certain channels are transmitted using VPS (Video Programme System) or PDC (Programme Delivery Control). [. . . ]