User manual TERRATEC AXON AIX 101 1.0

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TERRATEC AXON AIX 101 1.0. We hope that this TERRATEC AXON AIX 101 1.0 user guide will be useful to you.


TERRATEC AXON AIX 101 1.0 : Download the complete user guide (2685 Ko)

Manual abstract: user guide TERRATEC AXON AIX 101 1.0

Detailed instructions for use are in the User's Guide.

[. . . ] TERRATEC PRODUCER/AXON AIX 101/103 English Manual Version 1. 0, status: October 05 CE Declaration We: TerraTec Electronic GmbH, Herrenpfad 38, D-41334 Nettetal, Germany hereby declare that the product: AXON AIX 101 and AXON AIX 103 to which this declaration refers is in compliance with the following standards or standardizing documents: EN 55013(2001)+A1(2003), EN 55020(2002). The following are the stipulated operating and environmental conditions for said compliance: residential, business and commercial environments and small-company environments. This declaration is based on: Test report(s) of the EMC testing laboratory The information in this document is subject to change without notice and shall not be deemed as a warranty by the seller. No warranties, express or implied, are made with regard to the quality, suitability or accuracy of this document. [. . . ] Neither the controller nor the plug of the connecting cable should extend beyond the edge of the guitar body to reduce the risk of damage. When choosing the mounting location, ensure that the instrument can be placed on a stand with the controller attached. Choose the mounting location to ensure that the instrument will not be subjected to undue pressure while being transported in a bag or case with the AIX 101/103 attached. Selecting the mounting method Mounting with screws and/or adhesive strips/pads Permits the installation of the controller on a curved top in conjunction with adhesive strips Permits simple mounting and secure attachment. Press the controller firmly ­ but carefully ­ into place to ensure proper adhesion. Finally, insert the selftapping button-head screw (3x6 mm) through the hole in the controller and into the hole AXON AIX 101/103 (English) 11 previously drilled in the instrument. Over tightening the screw can damage the controller or the instrument. Note: The controller can be attached to practically any body type using the adhesive strips or pads. For more information, please see "Reusable adhesive pads" below. Adhesives may react chemically with some instrument finishes, resulting in discoloration or other damage. If in doubt, apply a small piece of adhesive strip/pad in an inconspicuous location for several days to determine whether they affect the finish of the instrument. If your instrument has a curved top or the installation location is shaped in such a way that the controller cannot be attached using adhesive strips alone, apply spacers to compensate for the uneven surface. Like the strips, the spacers also have adhesive on both sides which is protected by backing paper. The adhesive pads can be used in the same way as the strips to attach the controller. The pads can be reused many times, and can be washed carefully with a neutral cleaning product to remove dust and dirt, restoring their adhesive properties. When removing the controller, put the original protective backing back on the pads to keep them in good condition. Cut the Velcro strips, which are attached to one another, into three sections and apply them to the underside of the controller. Cut the Velcro into three sections Underside of the controller 2. Remove the protective backing from the other side of the Velcro strips and attach the controller to the guitar body. The controller can now be gently pulled off and reattached to the body as needed. Note: This is not the most secure mounting method and should only be used if no other option is suitable, or if the pickup will be used often on different instruments. 12 AXON AIX 101/103 (English) Mounting with bracket This mounting method has the advantage of not requiring screws to attach the controller to the instrument body. Before attaching the bracket to the instrument, remove the screws indicated by arrows on the underside of the controller and use the screws to mount the bracket to the controller as shown. Apply two spacers (with double-sided adhesive) to the bracket to prevent scratching the instrument's finish and attach the controller to the instrument as shown. spacers (with double-sided adhesive) As an elegant alternative, you can also attach the bracket to the instrument with the strap button (using spacers if possible to avoid scratches). [. . . ] Fasten the pickup by threading the screws into the holes in the guitar top. 20 AXON AIX 101/103 (English) 3. Replacing the strings and adjusting the pickup height Replace the strings of the instrument and adjust the height of the pickup by turning the mounting screws. The distance between the upper edge of the pickup and the undersides of the strings should be around 1 mm when pressing the string to the highest fret. Installation with mounting plates (AIX 103 only) Permits the pickup to be removed and replaced without having to readjust the pickup height. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TERRATEC AXON AIX 101 1.0




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TERRATEC AXON AIX 101 1.0 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.