User manual TEFAL SUPERGLIDE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TEFAL SUPERGLIDE. We hope that this TEFAL SUPERGLIDE user guide will be useful to you.
Manual abstract: user guide TEFAL SUPERGLIDE
Detailed instructions for use are in the User's Guide.
[. . . ] - Do not exceed the MAX line indicated on the water tank (with the iron set on its heel). - Close the water tank filler cover.
A
B
C
Setting the temperature
- Set the temperature control shown in the diagram below (D) referring to the table below (or on the heel). - The thermostat light comes on. Wait for the light to go off and come on again before you start ironing (E).
D
E
Setting the steam level (F)
- In order to avoid water dripping from the iron onto the linen: · Turn off the steam when ironing silk or synthetic fabrics. · Set it at the minimum position for wool.
F
What temperature and which steam setting to use ?
FABRIC LINEN COTTON WOOL SILK
Polyester, Acetate, Acrylic, Nylon
POSITION OF THERMOSTAT CURSOR MAX
STEAM SETTING POSITION MAX
SYNTHETIC
MIN
DRY
= STEAM ZONE
Moistening the linen (Spray)
- When steam or dry ironing, press several times on the Spray Button to moisten the linen (G) and to remove stubborn creases. [. . . ] · NEVER DISMANTLE YOUR IRON ; ALWAYS CONTACT AN APPROVED SERVICE CENTRE. Any professional use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no resposibility and the guarantee will not apply.
Name of manufacturer : CALOR S. A. S 220 - 240 V a. c. 1460 - 1740 W 50 / 60 Hz Made in France OR Name of manufacturer : CALOR S. A. S 127 V a. c. 1265 W 50 / 60 Hz Made in France
3. 12. 104
3. 12. 104
HELPLINE
If you have any problems or queries, please call our Customer Relations Team first for expert help and advice : 0845 602 1454 - UK (01) 4751947 - IRELAND Or consult our web site : www. tefal. co. uk
5- IS THERE A PROBLEM ?
Solutions
· Restart the iron by lightly moving it. · Set the thermostat control to the required fabric to be ironed. · · · · Wait until the thermostat light goes out. See the section "Storing your iron".
Problems
Possible causes
· The iron does not heat up.
· The auto-stop safety switch has operated · Thermostat control not correctly positioned
· Water drips from the holes in the sole plate.
· The chosen temperature is too low and does not allow for the formation of steam. · You have stored the iron horizontally, without emptying it and without setting it to DRY.
· Brown streaks come through the holes in the sole plate and stain the linen.
· You are using chemical descaling agents. · You are using pure distilled water.
· Fabric fibres have accumulated in the holes of the sole plate and are burning.
· Your linen is not rinsed sufficiently or you have ironed a new garment before washing it.
· Do not add any descaling agents to the water in the water tank. · Do a self-cleaning and use tap water or 50 % tap water and 50 % demineralized water. · Ensure linen is rinsed thoroughly to remove any soap deposits or chemicals on new garments which have been sucked up by the iron.
· The sole plate is dirty or brown and can stain the linen.
· You are using too high a temperature.
· You are using starch.
· Clean the sole plate as indicated above. · Try to avoid ironing over zips which may have rough edges.
· There is little or no steam.
· · · ·
The water tank is empty. You iron has been used dry for too long.
If you have any problem or queries, please contact our Customer Relations team first for expert help and advice.
· The sole plate is scratched or damaged.
· You have placed your iron flat on a metallic rest-plate. · You have ironed over a zip.
Français
Lisez attentivement ce mode d'emploi et conservez-le.
SUPERGLISS
Touche Super Pressing (selon modèle) Voyant Auto-Stop
(selon modèle)
Pour défroisser
Touche Spray Tiroir de remplissage du réservoir Commande vapeur Tige anti-calcaire
A nettoyer une fois par mois
Pour humidifier le linge
Cordon d'alimentation
Spray
Voyant de thermostat
S'éteint quand la température est atteinte
Semelle
Repère maxi du réservoir
Ne dépassez pas cette limite
Commande du thermostat
Pour choisir la température de repassage
Attention !Retirez le protecteur de semelle avant de faire chauffer le fer (selon modèle). Attention !
Avant la première utilisation de votre fer en position vapeur, nous vous recommandons de le faire fonctionner quelques instants en position horizontale et en dehors de votre linge. Dans les mêmes conditions, actionner plusieurs fois la commande Super Pressing. Durant les premières utilisations, il peut se produire un dégagement de fumée et une odeur sans nocivité. Ce phénomène sans conséquence sur l'utilisation disparaîtra rapidement.
Quelle eau utiliser ?
Votre appareil a été conçu pour fonctionner avec l'eau du robinet. [. . . ] · NE DEMONTEZ JAMAIS VOTRE FER ; ADRESSEZ-VOUS TOUJOURS A UN CENTRE SERVICE AGREE.
4- RANGER VOTRE FER
- Débranchez-le et attendez que la semelle se refroidisse. - Videz le réservoir et placez la commande de repassage sur SEC. - Rangez le fer sur son talon.
5- UN PROBLEME AVEC VOTRE FER
Solutions
· Placez le thermostat sur la zone colorée (de à MAX) · Attendez que le voyant s'éteigne. · N'ajoutez aucun produit détartrant à l'eau du réservoir. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TEFAL SUPERGLIDE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TEFAL SUPERGLIDE will begin.