User manual TECHNICS SX-PR305 K

[. . . ] If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. or the BSI mark WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN/ YELLOW. How to replace the fuse The location of the fuse differ according to the type of AC mains plug (figures A and B). [. . . ] Press the YES button to execute the function, or press the NO button to cancel the function. Note that in some cases, the CONTROL, RHYTHM and CHORD part data in the destination tracks may be lost. SONG COPY Copy all the recording data of a song to a specific song memory. 1. On the FROM side, use the SONG and Sequencer buttons to select the song number you wish to copy from. 2. On the TO side, use the SONG and buttons to select the song number to copy to. 3. Press the YES button to execute the function, or press the NO button to cancel the function. 97 QQTG0692 Part IV Sequencer TRACK MERGE Merge the recorded contents of two tracks (source tracks) and store the merged contents in a third track (destination track). When the TRACK MERGE function is executed, the data is erased from the two source tracks. MEASURE COPY Copy recorded data of specified measures to a specified point. On the destination track, the new data replaces the current measure contents. 1. On the FROM side, use the TRACK and buttons to select the two source tracks. You cannot select the track to which the CONTROL, RHYTHM or CHORD part has been assigned. If the part assigned to the left source track ("left" meaning its position on the TRACK MERGE display) is different from the part assigned to the right source track, when the parts are merged in the destination track, the new track is assigned the same part as the left track. On the FROM side, specify the settings with the corresponding buttons. Press the YES button to execute the function, or press the NO button to cancel the function. 99 QQTG0692 Sequencer Part IV Sequencer MEASURE INSERT Insert specified measures at a specified point. The length of the performance accordingly increases by the number of inserted measures. APC TO SMF CONVERT This function converts data to Standard MIDI File (SMF) format, allowing you to play back song data created using this instrument's automatic accompaniment and/or PERFORMANCE PADS on an external sequencer or sound generator. 1. On the FROM side, specify the settings with the corresponding buttons. This function does not work for the CHORD or RHYTHM track in which the repeat function has been stored. If ALL is selected, the measures are inserted in all tracks at the same time. In the DATA column, a check mark () indicates a track in which data is stored. Tracks in which RHYTHM, CONTROL, APC and CHORD parts are stored cannot be selected (- - - is shown). 2. Use the APC/PAD and buttons to select the parts you wish to convert. Press the CONVERT button. Note that after the conversion, the APC/CHORD part data is cleared; if necessary, save this data beforehand. Press EXECUTE to continue with the conversion, or press the CANCEL button is you wish to discontinue. If you wish to discontinue the conversion process midway, press the ABORT button. 2. [. . . ] Please turn the power off, set the switch to the desired setting and turn the power back on. Record on the SEQUENCER and Copy the melody and chord information into a SOLO pad. It is not possible to set the start measure to the measures you set to copy. 192 QQTG0692 Index A ADVANCED . 195 194 QQTG0692 Specifications SX-KN2400 KEYBOARD SOUND GENERATOR MAX. [. . . ]