Detailed instructions for use are in the User's Guide.
[. . . ] 32 inch Digital / Analog LCD TV Owner's Manual
WF32L6
POWER
INPUT SLEEP SELECT
1 4 7 SETUP
2 5 8 0
3 6
AUDIO
9
STILL
SCREEN MODE
ENTER
BACK INFO
CH RETURN
VOL.
MUTE
CH
HIGH-DEFINITION TELEVISION
TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA.
IF YOU NEED ADDITIONAL ASSISTANCE WITH SET-UP OR OPERATING AFTER READING OWNER'S MANUAL, PLEASE CALL TOLL FREE 1-800-605-8453, OR VISIT OUR WEB SITE AT http://www. Symphonic. us
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The important note is located on the rear of the cabinet.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
IMPORTANT SAFEGUARDS
1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. [. . . ] · The Still function will be released after 5 minutes.
1
Switch the audio language. · When you press [AUDIO], the currently selected language and the number of received languages will be displayed on the screen. · Every time you press [AUDIO], the language will be switched.
2
Canceling Still function. · The Still function will be canceled by pressing any button while Still function is working. NOTE:
· Press any key except [POWER] to cancel still mode.
6-1
English 1/3
English 1/3
Spanish 2/3
Other 3/3
"Other" is indicated when the language is not English, Spanish or French. * For international stations audio language will still be displayed as English.
SWITCHING AUDIO
This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode.
AUDIO
7 SETUP
8 0
9
STILL
SCREEN MODE
· Languages you can switch differ depending on the receiving broadcast. · The information display will automatically disappear in one minute. NOTE:
· The [AUDIO] feature does not affect external source sound.
TV
1
Switch the audio. · Every time you press [AUDIO], the audio will be switched as below.
6
SAP / STEREO
When the broadcasting has all audio. . .
SAP / STEREO
SAP / STEREO
SAP / MONO
19
EN
WATCHING TV
Pause the image. · When you press [STILL], the image shown on the screen is paused.
(cannot be switched. ) STEREO : Outputs stereo-audio SAP : Outputs second audio program MONO : Outputs mono-audio
SWITCHING EXTERNAL INPUT
When you connect external devices including a DVD player and home audio system, you can easily switch the input mode with the remote control.
POWER INPUT SLEEP SELECT
· When you press [INFO], the current external input mode, the type of resolutions for video signal, TV aspect ratio, CC and TV rating will be displayed at the top-right of the screen. 1) When using VIDEO1 or S-VIDEO1 input jack
Video1
480i SD TV-PG DLSV CC
1 4 7 SETUP
2 5 8 0
3 6
AUDIO
9
STILL
SCREEN MODE
2) When using VIDEO2 or S-VIDEO2 input jack
Video2
480i SD
ENTER
BACK INFO
TV-PG DLSV CC
CH RETURN
VOL.
MUTE
CH
3) When using COMPONENT1 input jacks
1
Switch the input mode. · When you press [INPUT SELECT] or [CH K/L] on the remote control, the input mode will be switched as below. TV/DTV channel Video1 Video2 Component1 5) When using HDMI IN jack Component2
Component1
1080i HD NONE
4) When using COMPONENT2 input jacks
Component2
1080i HD NONE
HDMI
HDMI
: press [CH K]
1080i
HD
16:9
NONE
· To use the VIDEO1 or S-VIDEO1 input jack on the TV, select "Video1". · To use the VIDEO2 or S-VIDEO2 input jack on the TV, select "Video2". · To use the COMPONENT1 input jacks on the TV, select "Component1". · To use the COMPONENT2 input jacks on the TV, select "Component2". · To use the HDMI IN jack on the TV, select "HDMI".
· The information display will automatically disappear in one minute.
20
EN
CHANGING THE SCREEN DISPLAY MODE
Each 4 types of display mode can be selected in the screen mode in both 4:3 and 16:9 TV aspect ratio. You can select your favorite screen mode and enjoy the program.
AUDIO
1
Switch the Screen mode. · Every time you press [SCREEN MODE], the TV aspect ratio will be switched alternately.
2
7 SETUP
8 0
9
STILL
To press [SCREEN MODE] repeatedly until the normal screen displays. NOTE:
· You may not switch the display mode depending on the program.
SCREEN MODE
ENTER
BACK INFO
When the broadcast is sending 4:3 video signal. . .
When the broadcast is sending 16:9 video signal. . .
Sidebar (normal)
Full
Full (normal)
Zoom
Wide
Cinema
Expand
Cinema
[Sidebar] Sidebar will display a 4:3 picture at its standard 4:3 size. [Full] Full will display a 4:3 picture at a 16:9 size, with horizontal elongation necessary to fill the screen. [Cinema] Cinema will display a 4:3 picture at a 16:9 size, with less horizontal elongation necessary to fill the screen because a little bit of the top and bottom edge of the screen will be cut off. [. . . ] If infrared light appears through digital camera, the remote control unit is working.
LCD CLEANING
Wipe the LCD of the TV with a soft cloth. Before cleaning the LCD, disconnect the power cord.
SERVICING
Should your unit become inoperative, do not try to correct the problem by yourself. Turn off, unplug the power cord and please call our help line mentioned on the front page, to locate an Authorized Service Center.
34
EN
SPECIFICATIONS
GENERAL SPECIFICATIONS
Television system: ATSC NTSC-M TV Standard
ELECTRICAL SPECIFICATION
Sound output: 5W, 8 ohm x 2
OTHER SPECIFICATIONS
Remote control: Operating temperature: Digital encoded infrared light system
Closed Caption System:
§15. 119/FCC (Analog CC) §15. 122/FCC (Digital CC) Channel coverage (ATSC/NTSC) VHF: 2 ~ 13 UHF: 14 ~ 69 CATV: 2 ~ 13, A ~ W, W+1 ~ W+94, A-5 ~ A-1, 5A Tuning System: Channel frequency synthesized tuning system Channel access: Direct access keyboard, Programmable scan, and Up/down Terminals Antenna input: VHF/UHF/CATV 75 ohm unbalanced (F-type) S-Video input: Mini DIN 4-pin jack x 2 Video input: RCA jack x 2 Audio input: RCA jack (L/R) x 4 Component Video/Audio input: One pin jack (Y) / 1Vpp x 2 Two pin jacks (Pb/Pr) / 700mVpp x 4 RCA jack (L/R) x 4 HDMI / Audio input: HDMI jack RCA jack (L/R) x 2 Coaxial digital audio output: One pin jack, 500mVpp Analog Audio output: RCA jack (L/R) x 2 Stereo Sound System Speaker
· Designs and specifications are subject to change without notice and without our legal obligation. · If there is a discrepancy between languages, the default language will be English.
35
EN
MISCELLANEOUS / SPECIFICATIONS
5°C to 40°C (41°F to 104°F) Power requirements: AC120V, 60Hz Power consumption (Maximum): 160W LCD: 32" wide XGA panel (1, 366 x 768 pixels) Dimensions: <Without stand> H : 23-7/16" (595mm) W: 32-3/16" (818mm) D : 4-9/16" (115mm) <With stand> H : 25-3/8" (644mm) W: 32-3/16" (818mm) D : 10-13/16" (275mm) Weight: 30. 4 lbs. [. . . ]