User manual SONY XR-C410

[. . . ] 8 Scanning the tracks -- Intro scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Playing tracks repeatedly -- Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Playing tracks in random order -- Shuffle play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Labelling a CD -- Disc memo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If the cassette is already inserted, press (TAPE) to start playback. FWD 1000 2 Press (SEL) momentarily. EN Getting Started/Cassette Player 1000 The minute digit blinks. The side facing up is being played. REV 3 Set the minute digits. The side facing down is being played. to go forward to go back Tip To change the tape transport direction, press (TAPE) during tape playback. 1008 3 Press (DSPL) momentarily. To Stop playback Eject the cassette Press (OFF) 6 1008 The clock activates. Fast-winding the tape During playback, press either side of (PRESET/DISC). REW PRESET DISC FF Note If the POWER SELECT switch on the bottom of the unit is set to the B position, the clock cannot be set unless the power is turned on. Set the clock after you have turned on the radio. Rewind Fast-forward To start playback during fast-forwarding or rewinding, press (TAPE) . 5 Actual total number: Sony XR-C410 (E) 3-810-309-11 (2) Locating the beginning of the tracks -- Automatic Music Sensor (AMS) You can skip up to nine tracks at one time. During playback, press either side of (SEEK/AMS) momentarily. SEEK AMS Switching to the radio during fastwinding the tape -- Automatic Tuner Activation (ATA) Press (5) during playback. When fast-forwarding or rewinding with (PRESET/DISC), the tuner will turn on automatically. To locate the previous tracks To locate the succeeding the tracks Note The AMS function may not work when : · the blanks between tracks are shorter than 4 seconds · there are noises · there are long sections of low volume or quiet sections. Skipping blanks during tape playback -- Blank skip Press (6) during playback. Blanks longer than eight seconds will be automatically skipped during tape playback. Changing the displayed items Each time you press (DSPL) momentarily during tape playback, the displayed item changes as follows: z Tape playback z Clock z Frequency* EN * While the ATA function is activated. Playing a tape recorded in the Dolby B NR system Press the (3) when you want to listen to a tape recorded in the Dolby* B NR system. "a" appears on the display. * Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. "DOLBY" and the double-D symbol a are trademarks of Dolby Laboratories Licensing Corporation. Playing the tape in various modes Searching the desired track -- Intro scan Press (1) during playback. The unit returns to the normal playback mode. Playing a CrO2 or metal tape Press (4) when you want to listen to a CrO2 (TYPE II) or metal (TYPE IV) tape. To cancel this function, press (4). Playing tracks repeatedly -- Repeat play Press (2) during playback. When the currently played track is over, it will be played again from the beginning. The unit returns to the normal CD playback mode. Notes · You can set the "SKIP" mode on up to 24 track. · You cannot set the "SKIP" mode on all the tracks. 5 10 Actual total number: Sony XR-C410 (E) 3-810-309-11 (2) Playing the specific tracks only You can select: · BANK ON to play the tracks with "PLAY" setting. · BANK INV to play the tracks with "SKIP" setting. Additional Information Precautions · If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before switching on. · If no power is being supplied to the unit, check the connections first. · If no sound comes from the speakers of a 2-speaker system, set the fader control to the center position. If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer. 1 During playback, press (4). "BANK" appears on the display. CD1 BANK BANK ON 2 Press (4) to select the desired mode. Each time you press (4) , the display changes as follows: z BANK ON z BANK INV Z BANK OFF Playback starts from the track following the current one. To go back to the normal playing mode, select "BANK OFF" in step 2. EN CD Changer Notes on Cassettes Cassette care · Do not touch the tape surface of a cassette, as any dirt or dust will contaminate the heads. · Keep cassettes away from equipment with built-in magnets such as speakers and amplifiers, as erasure or distortion on the recorded tape could occur. · Do not expose cassettes to direct sunlight, extremely cold temperatures or moisture. [. . . ] !¶ CD (disc play/CD changer select) button 8 !· TAPE/* (playback/transport direction change) button 5 !ª OFF button 4, 5 @º LIST (custom file mode select · set) button 9, 10 EN CD Changer/Additional Information 13 Actual total number: Sony XR-C410 (E) 3-810-309-11 (2) Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION 8 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 1% total harmonic distortion. Other Specifications Cassette player section Tape track Wow and flutter Frequency response Signal-to-noise ratio Cassette type TYPE II, IV TYPE I 67 dB 64 dB 4-track 2-channel stereo 0. 08 % (WRMS) 30 ­ 18, 000 Hz Dolby NR off 61 dB 58 dB General Outputs Line out (1) Power antenna relay control lead Power amplifier control lead Bass ±8 dB at 100 Hz Treble ±8 dB at 10 kHz 12 V DC car battery (negative ground) Approx. 188 × 58 × 174. 5 mm (7 1/2 × 2 3/8 × 6 7/8 in. ) (w/h/d) Approx. 182 × 53 × 153. 5 mm (7 1/4 × 2 1/8 × 6 1/8 in. ) (w/h/d) Approx. 10 oz. ) Parts for installation and connections (1 set) Front panel case (1) Bus cable (supplied with an RCA pin cord) RC-61 (1 m), RC-62 (2 m) RCA pin cord RC-63 (1 m), RC-64 (2 m), RC-65 (5 m) Rotary commander RM-X2S Source selector XA-U20 Dolby B NR Tone controls Power requirements Dimensions EN Tuner section FM 87. 5 ­ 107. 9 MHz External antenna connector 10. 7 MHz 8 dBf 75 dB at 400 kHz 65 dB (stereo), 68 dB (mono) Harmonic distortion at 1 kHz 0. 5 % (stereo), 0. 3 % (mono) Separation 35 dB at 1 kHz Frequency response 30 ­ 15, 000 Hz Capture ratio 2 dB Tuning range Antenna terminal Intermediate frequency Usable sensitivity Selectivity Signal-to-noise ratio Mounting dimension Mass Supplied accessories Optional accessories Optional equipment AM Tuning range Antenna terminal Intermediate frequency Sensitivity 530 ­ 1, 710 kHz External antenna connector 10. 71 MHz/450 kHz 30 µV Design and specifications are subject to change without notice. Power amplifier section Outputs Speaker outputs (sure seal connectors) Speaker impedance 4 ­ 8 ohms Maximum power output 30 W × 4 (at 4 ohms) 14 Actual total number: Sony XR-C410 (E) 3-810-309-11 (2) Troubleshooting guide The following check will assist in the correction of most problems which you may encounter with your unit. [. . . ]