User manual SONY XR-C5080R

[. . . ] This unit lets you enjoy a variety of features by using an optional rotary commander. In addition to the tape playback and the radio operation you can expand your system by connecting optional CD/MD unit*. * You can connect to an CD changer, MD changer, or an CD player, MD player. Before operating the unit for the first time or after replacing the car battery, you must reset the unit. [. . . ] Each time you press (AF/TA), the displayed items change as follows: Z AF z TA Blank Z * Select this to turn on both AF and TA functions. If the station name starts flashing after selecting a station with the AF function on, this indicates that no alternative frequency is available. Press (SEEK/AMS) while the station name is flashing (within eight seconds). The unit starts searching for another frequency with the same PI (Programme Identification) data ("PI seek" appears and no sound is heard). If the unit cannot find another frequency, "NO PI" appears, and the unit returns to the originally selected frequency. The Traffic Announcement (TA) and Traffic Programme (TP) data let you automatically tune in an FM station that is broadcasting traffic announcements even though you are listening to other programme sources. Press (AF/TA) until "TA" or "AF TA" lights up on the display. "TP" lights up on the display when the unit finds a station broadcasting traffic announcements. When the traffic announcement starts, "TA" flashes, then flashing stops when the traffic announcement is over. Tip When the traffic announcement starts while you are listening to another programme source, the unit automatically switches to the announcement and goes back to the original source when the announcement is over. notes · "NO TP" flashes for five seconds if the received station doesn't broadcast traffic announcements. Then, the unit starts searching for a station that does broadcast traffic announcements. When the "EON" indication appears with "TP" on the display, the current station makes use of broadcast traffic announcements of other stations in the same network. When you preset the RDS stations, the unit stores each station's data as well as its frequency, so you don't have to turn on the AF or TA function every time you tune in the preset station. You can select different setting (AF, TA, or both) for individual preset stations, or the same setting for all preset stations. To cancel all traffic announcements, turn off the function by pressing (AF/TA) until "AF" disappears. Press (AF/TA) repeatedly and select either "AF", "TA" or "AF TA" (for both AF and TA functions). Note that turning the "AF TA" function off stores RDS stations as well as non-RDS FM stations. You can preset the volume level of the traffic announcements beforehand, so you will not miss the announcement. When a traffic announcement starts, the volume will be automatically adjusted to the preset level. Presetting different settings for each preset station Press (AF/TA) repeatedly and select either "AF", "TA" or "AF TA" (for both AF and TA functions). Press the desired preset number button for two seconds until "MEM" appears. [. . . ] If the fuse blows again after replacement, there may be an internal malfunction. Distorted cassettes and loose labels can cause problems when inserting or ejecting tapes. Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit. The unit may not function properly if the connectors between the unit and the front panel are not clean. [. . . ]