User manual SONY XAV-601BT

[. . . ] 4-419-667-21(1) AV Center AV Center Operating Instructions Manual de instrucciones Istruzioni per l’uso GB ES IT XAV-601BT ©2012 Sony Corporation Be sure to install this unit in the dashboard of the car for safety. For installation and connections, refer to the supplied “Installation/Connections” guide. Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives. [. . . ] 36 Pairing Pairing is required only the first time you connect to a Bluetooth device (cellular phone, etc. * If you delete the device registration from this unit, you need to perform pairing again. * Passkey may be called “passcode, ” “PIN code, ” “PIN number, ” “password, ” etc. Notes • While connecting to a Bluetooth device, this unit cannot be detected from another device. € Depending on the device, the connection confirmation display may appear before inputting the passkey. € The time limit for inputting the passkey differs depending on the device. € This unit cannot be connected to a device that supports only HSP (Head Set Profile). Searching from the Bluetooth device The procedure to search for this unit from the other Bluetooth device is explained below. Touch “Bluetooth Connection, ” then set the signal to “ON. € Connecting When the ignition is turned to on with the Bluetooth signal activated, this unit searches for the last-connected Bluetooth device, and connection is made automatically if possible. This chapter explains how to connect manually to registered Bluetooth devices. Before starting, be sure to activate the Bluetooth signal both on this unit (page 42) and the other Bluetooth device. To connect from the other Bluetooth device Operate the other Bluetooth device to connect to this unit. When connection is made successfully, or appears at the top of the display. Note If connection is made during audio streaming, noise may occur over playback sound. Tip You can connect a cellular phone for audio streaming if it supports A2DP (Advanced Audio Distribution Profile). DR-BT30Q Sony Automotive XXXXXXX 6 If passkey* input is required on the display of the device, input “0000. XXXX “0000” This unit and the Bluetooth device memorize each other’s information, and when pairing is made, this unit is ready for connection to the device. 37 Handsfree calling Once the unit is connected to the cellular phone, you can make/receive handsfree calls by operating this unit. By the call history The unit stores the last 20 calls, allowing you to select one quickly from the list. The call is made and the calling display appears until the other party answers. Making calls By dialing a phone number 1 3 4 Press (HOME), then touch “Phone. [. . . ] Depending on the connecting device, the time limit for pairing may be short. Try completing the pairing within the time by setting a single digit passkey. Exit the source by pressing and holding (SOURCE/OFF) for 1 second, then turn on the unit. If the sound is output from the cellular phone, set the cellular phone to output the sound from the car speakers. [. . . ]