User manual SONY XA-NV100T READ THIS FIRST

[. . . ] 15 Playing tracks in random order -- Shuffle Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Getting Started Resetting the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 CD Player Listening to a CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To return to the normal playback mode, press (3) (SHUF/;) again. Note The AMS function may not work when : -- the blanks between tracks are shorter than four seconds. -- there are long sections of low volume or quiet sections. Changing the displayed items Each time you press (DSPL) during tape playback, the display changes as follows: B Tape playback B Clock B Frequency* Playing a CrO2 or metal tape Press (4) (METAL) during playback. To return to the normal playback mode, press (4) (METAL) again. * While the ATA function is activated. Playing a tape in various modes You can play the tape in various modes: ·REPEAT (Repeat Play) repeats the current track. ·ATA (Automatic Tuner Activation) turns on the tuner automatically while fast-winding the tape. ·BL SKIP (Blank Skip) skips blanks longer than eight seconds. * Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. "DOLBY" and the double-D symbol ; are trademarks of Dolby Laboratories Licensing Corporation. Switching to the radio while fastwinding a tape -- Automatic Tuner Activation (ATA) Press (5) (ATA) during playback. To return to the normal playback mode, press (5) (ATA) again. Skipping blanks during tape playback -- Blank skip Press (6) (BL SKIP) during playback. To return to the normal playback mode, press (6) (BL SKIP) again. 9 Radio Memorizing stations automatically -- Best Tuning Memory (BTM) The unit selects the stations with the strongest signals and memorizes them in the order of their frequencies. Caution When tuning in stations while driving, use Best Tuning Memory to prevent accidents. Memorizing only the desired stations You can store up to 6 stations on each band in the order of your choice. 1 2 3 4 Press (SOURCE) repeatedly to select the tuner. Press either side of (SEEK/AMS) to tune in the station you want to store on the number button. Press and hold the desired number button ((1) to (6)) until "PRESET" appears. To obtain the beep tone again, press these buttons once more. 14 With Optional Equipment CD/MD unit You can control two CD or MD units with this unit. Locating a specific point in a track -- Manual Search During playback, press and hold either side of (SEEK/AMS). Release the button when you have found the desired point. SEEK/AMS Playing a CD or MD 1 2 Press (SOURCE) repeatedly until "CD" or "MD" appears. CD/MD playback starts. To search backward To search forward Playing tracks repeatedly -- Repeat Play You can select: · REP 1 to repeat a track. During playback, press (2) (REPEAT) repeatedly until the desired setting appears. B REP 1 B REP 2* B REP 3* No display (Cancel) b When a CD/MD unit is connected, all the tracks play from the beginning. Switching to other discs During playback, press PRESET/DISC or . PRESET/ DISC To advance to the next disc To return to the previous disc Repeat Play starts. * "REP 2" and "REP 3" are only available when you connect one or more optional CD units, or when you connect two or more optional MD units. Changing the display item Each time you press (DSPL) during CD or MD playback, the item changes as follows: Disc number/ Track number/Elapsed playing time Y Clock To return to the normal playback mode, press (2) (REPEAT) repeatedly until "REP" desappears. Note When you play back a CD on this unit, Repeat 3 has the same function as Repeat 2. Locating a specific track -- Automatic Music Sensor (AMS) During playback, press either side of (SEEK/AMS) once for each track you want to skip. SEEK/AMS To locate preceding tracks To locate succeeding tracks 15 Playing tracks in random order -- Shuffle Play You can select: ·SHUF 1 to play the tracks on the current disc in random order. ·SHUF 2 to play the tracks in the current changer in random order. During playback, press (3) (SHUF/;) repeatedly until the desired setting appears. B SHUF 1 B SHUF 2 B SHUF All* No display (Cancel) b Additional Information Precautions · If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. · If no power is being supplied to the unit, check the connections first. · If no sound comes from the speakers of two-speaker systems, set the fader control to the center position. ·If your car is equipped with a power aerial, it will extend automatically while the unit is operating. If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer. Shuffle Play starts. * "Shuf All" is only available when you connect one or more optional CD units, or when you connect two or more optional MD units. To return to the normal playback mode, press (3) (SHUF/;) repeatedly until "SHUF" desappears. Notes on handling CDs A dirty or defective disc may cause sound dropouts while playing. To keep the disc clean, do not touch the surface. Do not stick paper or tape on the labelled surface. 16 Do not expose the discs to direct sunlight or heat sources such as hot air-ducts, or leave them in a car parked in direct sunlight where there can be a considerable rise in the temperature inside the car. To maintain high quality sound If you have drink holders near your audio equipment, be careful not to splash juice or other soft drinks onto the car audio. [. . . ] ·Set the fader control to the center position for two-speaker systems. ·An optional power amplifier is connected and you are not using the built-in amplifier. ·The beep tone is muted. The contents of the memory have been erased. ·The CD is forcibly inserted upside down or in the wrong way (MD). [. . . ]