User manual SONY VAIO VPC-Z212GX

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY VAIO VPC-Z212GX. We hope that this SONY VAIO VPC-Z212GX user guide will be useful to you.


SONY VAIO VPC-Z212GX : Download the complete user guide (3699 Ko)

You may also download the following manuals related to this product:

   SONY VAIO VPC-Z212GX QUICK START GUIDE (1355 ko)
   SONY VAIO VPC-Z212GX DATASHEET (325 ko)
   SONY VAIO VPC-Z212GX QUICK START GUIDE (1355 ko)
   SONY VAIO VPC-Z212GX RECOVERY, BACKUP AND TROUBLESHOOTING GUIDE (483 ko)

Manual abstract: user guide SONY VAIO VPC-Z212GX

Detailed instructions for use are in the User's Guide.

[. . . ] --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. CAUTION · You can use this player on AC power source only. When you use this player for the first time, or when you have not used it for a long time, leave it connected to AC power source for about one hour to charge the built-in backup battery for the clock, timer, preset radio stations, etc. The player will charge the battery automatically as long as it is connected to a power source. [. . . ] Make sure you have set the clock (see "Setting the clock" on page 23). SNOOZE TUNE TIME SET ­, + STANDBY TIMER ENTER MEMORY The Timer Before you begin, make sure the (clock) indication is not lit in the display. If it is lit, press STANDBY. 1 Prepare the music source you want to play. Source CD RADIO TAPE LINE Do this Insert a CD. Turn on the equipment connected to LINE IN. 2 Press TIMER to display the indication. Do the following operations by checking the display. 3 Press TUNE TIME SET + or ­ until the music source you want to play ("CD", "TAPE", "RADIO" or "LINE") appears in the display, and press ENTER MEMORY. continued The Timer 25 Waking up to music (continued) 4 Set the timer to the hour and the minutes you want the music to go on. 1 Press TUNE TIME SET + or ­ to set the hour and press ENTER MEMORY. 2 Press TUNE TIME SET + or ­ to set the minutes, and press ENTER MEMORY. 5 6 Set the timer to the hour and the minutes you want the music to go off. (Do as step 4. ) Press TUNE TIME SET + or ­ to set the volume you want, and press ENTER MEMORY. Tips · To exit the standby mode, press STANDBY to make the indication disappear. · The preset settings remain until you reset them. 7 Press STANDBY. The indication lights up and the power goes off; the player enters the standby mode. Then the power will go off at the preset time, and the player will enter the standby mode again. To check/change the waking up timer settings Press TIMER, then ENTER MEMORY. Each time you press ENTER MEMORY, a stored setting is displayed in the set order. To change the setting, display the setting you want to change and re-enter it. · You can set different volume for the waking up timer and the sleeping timer. For instance, you can sleep at lower volume and wake up at higher volume. 1 2 3 Play the music source you want. Press SLEEP to display "SLEEP. " Press SLEEP to select the minutes until the player goes off automatically. Each time you press the button, the indication changes as follows: "60" t "90" t "120" t no indication t "10" t "20" t "30". If 4 seconds have passed after you pressed SLEEP, the minutes in the display are stored in memory. When the preset time has passed, music stops and the player goes off automatically. To cancel the sleep function Press SLEEP to make "SLEEP" disappear from the display. To change the preset time Do the steps 2 and 3 again. The Timer 31 Setting Up Hooking up the system According to the illustrations, connect the cords firmly. Connect the AC power cord last. 2 AM loop antenna 2 FM lead antenna 1 Power cord Left speaker Right speaker to a wall outlet 1 Audio connecting cord 3 AC power cord 1 Speaker cord Notes · Be sure to turn off the power of the player before connecting/ disconnecting the AC power cord. If you connect any other speakers or equipment, a malfunction may occur. 1 Hooking up the speakers 1 Connect the power cord of the POWER OUTPUT on the left speaker to the POWER IN jack of the player. 32 Setting Up 2 Connect the audio connecting cord (supplied) to the SIGNAL OUTPUT jacks of the player and the SIGNAL INPUT jacks of the left speaker. Connect the white plugs to the L (left) jacks and the red plugs to the R (right) jacks. Setting Up 3 Connect the speaker cord of the right speaker to the SPEAKER OUTPUT R-ch terminals of the left speaker. 2 Connect the red wire to the (+) plus terminal, and the black wire to the (­) minus terminal. [. . . ] · Connect the AC power cord to a wall outlet securely. General · Connect the power cord to the POWER IN of the player (see page 32). · Someone is using a portable telephone or other equipment that emits radio waves near the player. · Take out the CD and leave the CD tray open for about an hour to dry moisture condensation. · Press x on the CD section to switch the function of the player to "CD". [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VAIO VPC-Z212GX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VAIO VPC-Z212GX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.