User manual SONY VAIO VPCSB4DFX/L

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY VAIO VPCSB4DFX/L. We hope that this SONY VAIO VPCSB4DFX/L user guide will be useful to you.


SONY VAIO VPCSB4DFX/L : Download the complete user guide (3793 Ko)

You may also download the following manuals related to this product:

   SONY VAIO VPCSB4DFX/L QUICK START GUIDE (1260 ko)
   SONY VAIO VPCSB4DFX/L CARE AND HANDLING OF YOUR VAIO COMPUTER (125 ko)
   SONY VAIO VPCSB4DFX/L RECOVERY, BACKUP AND TROUBLESHOOTING GUIDE (358 ko)

Manual abstract: user guide SONY VAIO VPCSB4DFX/L

Detailed instructions for use are in the User's Guide.

[. . . ] If this unit causes interference (which can be determined by unplugging the power cord from the unit), try these measures: Relocate the unit with respect to the susceptible equipment. Plug this unit and the susceptible equipment into different branch circuit. (According to standard EN60601-1-2 and CISPR11, Class B, Group 1) Caution When you dispose of the unit or accessories, you must obey the law in the relative area or country and the regulation in the relative hospital. WARNING on power connection Use a proper power cord for your local power supply. Use the approved Power Cord (3-core mains lead) / Appliance Connector / Plug with earthining-contacts that conforms to the safety regulations of each country if applicable. [. . . ] · When not using the RM-P110, be sure to set the KEYBOARD sub menu of the SETUP MENU to OFF (see page 48). To add information to the title or edit title information The TITLE INFO display of the title menu allows you to edit title information. Title name HIGH EDGE Recording LOW ACTIVE 6 Press the SET button. The message "NOW SAVING. . . " appears and the unit starts to save the setting. When the saving is completed, the message disappears and the unit returns to the normal display. Title information (data of 2048 bytes) Adding Information to Titles When you record data, the recording month/date/year/ hour/minute/second (example: 01/06/04 17:25:19) is recorded automatically. Also, the RM-P110 remote control unit (not supplied) allows you to change the title name and to record data of 2048 bytes every title using the keyboard of the RMP110. To use an RM-P110 (not supplied) as a keyboard for editing/adding title name and information You should carry out the following operation and menu settings: · Connect the RM-P110 to the RS-232C connector of the unit. · Set the REMOTE I/F sub menu (see page 48) of the SETUP MENU to RS232C. · Set the KEYBOARD sub menu (see page 48) of the SETUP MENU to ON. Use the ESC key for the backspace function. For detailed information, see "Verifying/Editing Information About the Title" on page 43. When you record using equipment such as external equipment, data is recorded via the communication protocol. Pre Rec Function When the PRE REC sub menu of the SETUP is set to "ON, " the unit saves the last 5 seconds of video data in the inernal memory. This function allows the unit to start recording the last 5 seconds of video data saved previously for continuity. 1 Press the MENU button. 30 Recording The TOP menu appears. 5 Select the desired mode by pressing the V or v button. Mode OFF Setting To record the video signal promptly after you start recording. Go to step 5, after the message Now loading. . . " disappears and the DISC IN display lights up. The recorded discs may not be able to be played back due to scratch on the disc, dust accumulated on the disc, conditions recorded or recording equipment. 5 Playback Press the BPLAY button. Playback starts. Playback a Disc Note For a moment, the picture is frozen and audio playback stops between titles. 1 3 2, 4 To stop playback Press the xSTOP button. Fast Forward or Reverse Playback To view fast forward playback Press the >NEXT/DOWN button with the BPLAY button held down. This allows you to view fast forward playback at a speed three times the speed of normal playback. 5 xSTOP button 1 Press the 1 (power) switch to turn the power on. When the message changes to "Now loading. . . ", and then to "NO DISC!. ", go to the next operation. Note To view reverse playback Press the . PREV/UP button with the BPLAY button held down. This allows you to view fast reverse playback at a speed three times the speed of normal playback. Adding Indexes During Playback You can add indexes using the SVRM-100A remote control unit. For detailed information on how to add indexes, see "Using an SVRM-100A Remote Control Unit (Not Supplied)" on page 58. If the power is not turned on and the front panel display does not light even if you press the 1 (power) switch, check whether the MAIN POWER switch on the rear panel is set to the ] (on) side. For detailed information on how to turn the power on or off, see "Turning the Power On/Off" on page 16. Playback 35 Searching for Desired Point Jumping to a Desired Title The B or b button allows the unit to jump to the title before or after the title currently being played. Jumping to a Desired Chapter The . PREV/UP or >NEXT/DOWN button allows the unit to jump to the chapter before or after the chapter currently being played. Playback >NEXT/DOWN button . PREV/UP button 1 1 2 2 When you use the >NEXT/DOWN button: When you press this button once, the unit jumps to the start point of the next chapter. When you use the . PREV/UP button: When you press this button once, the unit jumps to the start point of the chapter currently being played. When you press this button twice, the unit jumps to the start point of the previous chapter. When you press the B button: When you press this button once, the unit jumps to the start point of the title currently being played. When you press this button twice, the unit jumps to the start point of the previous title of the title currently being played. [. . . ] The playback speed and direction are determined according to the direction in which the dial is turned and the speed, and the search command is output. 3 Press the INDEX button on the remote control unit one time. The INDEX command is sent and the unit is put in the index scan mode. 4 To search for an image located before the current position, press the REW button. To search for an image located after the current position, press the F FWD button. When the unit detects an index signal, the unit plays back the image recorded at that point for about 10 seconds, and then searches for the next index signal. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VAIO VPCSB4DFX/L




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VAIO VPCSB4DFX/L will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.