User manual SONY VCT-VPR10

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY VCT-VPR10. We hope that this SONY VCT-VPR10 user guide will be useful to you.


SONY VCT-VPR10 : Download the complete user guide (933 Ko)

You may also download the following manuals related to this product:

   SONY VCT-VPR10 NOTE ON USE (17 ko)
   SONY VCT-VPR10 MARKETING SPECIFICATIONS (175 ko)

Manual abstract: user guide SONY VCT-VPR10

Detailed instructions for use are in the User's Guide.

[. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ??Reorient or relocate the receiving antenna. ??Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. [. . . ] For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. 1 While pulling the camera mounting shoe lock lever fully forward, slide the camera mounting shoe from the tripod head. 2 Align the pin and the camera mounting screw of the camera mounting shoe with the positioning hole (a) and the screw hole for the tripod. Caution When attaching a camera other than a video camera to the tripod, position it so that it does not to touch the pin for video cameras. Then push the camera mounting shoe lock lever to the back to prevent the shoe from coming out. 4 Connect the terminal of the connecting cable (c) to the terminal of the camera. Be careful not to connect it upside down or you may damage the tripod or camera. ??When connecting the connecting cable for multi terminal to the multi terminal of the camera (shaped as in (d)), align the ?Caution If you leave the camera in standby mode for a while, the camera turns off automatically. To resume standby mode, turn on the camera, pressing the POWER button (a) of the Remote Commander. To record a still image Half-press the PHOTO button (b) to bring the camera into focus, and then press the button all the way. Locking function (B) During bulb shooting or continuous shooting, you can set the PHOTO button so that it is held down. With the PHOTO button fully pressed down, slide it in the direction of the arrow. ??When the PHOTO button is locked during bulb shooting, the shutter is open. ??When the PHOTO button is locked during continuous shooting, the shutter continues to open and close. Caution ??Not all cameras support bulb shooting or continuous shooting. ??Do not press the PHOTO button with excessive force or the Remote Commander may break. Detaching Remote Commander (C) When shooting still photos, you can prevent camera shake by detaching the remote commander from the tripod before pressing the PHOTO button. [. . . ] ??Be careful not to loosen the pan handle locking lever too much or the pan handle may come off. 2 Loosen the pan lock lever and tilt lock lever and fold down the pan handle. 4 Loosen the leg length adjustment lock lever of the three legs and fold the legs. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VCT-VPR10




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VCT-VPR10 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.