User manual SONY TDG-BR250/B INSTRUCTIONS (3D GLASSES)

[. . . ] Norway: Use of this radio equipment is not allowed in the geographical area within a radius of 20 km from the centre of Ny-Alesund, Svalbard. Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. The use of optical instruments with this product will increase eye hazard. [. . . ] " In the case of Bluetooth Audio, touch "Play Menu, " then "BT Menu. *1*2 After the search is complete, the list of detected devices*3 appears. *1 If the Bluetooth signal of this unit is off, it activates automatically when searching starts. After the search is complete, this unit appears as "Sony Automotive"* in the list of the other Bluetooth device. " Also perform the required operation on the other Bluetooth device. Pairing is complete and this unit is connected to the other Bluetooth device. When connection is made successfully, or appears at the bottom of the display. After you perform the required operation on the other Bluetooth device, the passkey input display appears on this unit. " Pairing is complete and this unit is connected to the other Bluetooth device. When connection is made successfully, or appears at the bottom of the display. The procedure to search for this unit from the other Bluetooth device is explained below. When connection is made successfully, or appears at the bottom of the display. The call is made and the calling display appears until the other party answers. " The call is made and the calling display appears until the other party answers. For details on how to manage the phonebook data, see "Phonebook management" on page 41. You can make a call using the voice tag stored on the connected cellular phone. " The call is made and the calling display appears until the other party answers. Tip You can also browse the phonebook of the connected cellular phone on this unit and make a call (page 42). Say the voice tag in the same way as you stored it on the cellular phone. If the voice dial function is activated on the connected cellular phone, it may not work via this unit. Do not use the voice dial function on the cellular phone while it is connected to this unit. Noises such as the engine running may interfere with sound recognition. [. . . ] Depending on the other device, searching from this unit may not be possible. Depending on the status of the other device, searching from this unit may not be possible. Depending on the status of the other device, it may not be possible to obtain the name. If ambient noise other than the phone call sound is loud, try reducing this noise. [. . . ]