User manual SONY STR-DA5800ES

[. . . ] 4-433-534-12(1) Multi Channel AV Receiver Please read the Quick Setup Guide supplied with the receiver first. This allows you to understand the connections and operations flow of the receiver more easily. Operating Instructions Mode d’emploi US FR ©2012 Sony Corporation Printed in Malaysia STR-DA5800ES WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. [. . . ] Using Multi-zone Features To finish the zone 2/zone 3 operation Press ZONE, then press ? press ZONE SELECT repeatedly to select zone 2 , zone 3 or the main zone. Each time you press ZONE POWER, the output signals for the selected zone will be turned on or off. 83US Using Other Features • When you set “Zone2 Out” in the “HDMI Settings” menu to “On, ” you cannot use the “Control for HDMI” function. We recommend that you connect the receiver to products featuring “BRAVIA” Sync. Notes • The following features may operate with non-Sony equipment. € System Power-Off – One-Touch Play – System Audio Control • The following features are Sony proprietary functions. € Scene Select – Home Theater Control • Equipment not compatible with “BRAVIA” Sync can not activate these features. using “BRAVIA” Sync features What is “BRAVIA” Sync?€BRAVIA” Sync is the name of a function on Sony products that enables compatible equipment connected via HDMI cables to be operated mutually using the “BRAVIA” remote control. This mutual operation is enabled by the Control for HDMI function using HDMI CEC (Consumer Electronics Control) standardized for HDMI (High-Definition Multimedia Interface). By connecting Sony equipment that are compatible with the “BRAVIA” Sync with an HDMI cable (not supplied), operation is simplified as below: • System Power-Off (page 85) • One-Touch Play (page 85) • System Audio Control (page 85) • Audio Return Channel (ARC) (page 86) • Scene Select (page 86) • Home Theater Control (page 86) • Remote Easy Control (page 86) Preparing for the “BRAVIA” Sync To use the “BRAVIA” Sync, turn the Control for HDMI function on for both the receiver and the connected equipment. Turn the Control for HDMI function of the receiver and the connected equipment on individually. 1 2 3 4 Select “Settings” from the home menu, then press . The Control for HDMI function does not work in the following cases: • When you connect the receiver to a device which does not correspond to the Sony Control for HDMI function. € When you connect the receiver and equipment using other than an HDMI connection. € The Control for HDMI function does not work on a device connected to the HDMI OUT B jack of the receiver. 84US 5 Turn the Control for HDMI function of the connected equipment on. For details on setting the connected equipment, refer to its operating instructions. When you set “Pass Through” to “On, ” or “Auto, ” sound and image can be output only from the TV while the receiver remains in standby mode. 6 Repeat step 5 to set the Control for HDMI function and to display the image of all the playback equipment you want to use. To use the One-Touch Play function of the camcorder 1 Turn the Control for HDMI function on for both the receiver and your camcorder. [. . . ] However, there will be no problems, even if you continue to use the receiver without changes. However the speakers are not placed in the proper position with respect to each other. See “1: Installing speakers” (page 25) and check the relative positions of the speakers. code 33 Code 34 Warning 40 Warning 41 Warning 42 Warning 43 Warning 44 NO WARNING There is no warning information. [. . . ]